Rear Panel - D-Link EasySmart DGS-1100-24 Manual

D-Link EasySmart Switch User Manual
Figure 3 – DGS-1100-24 Front Panel
Power LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-24):
Flashing: Indicates a network link through the corresponding port.
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Green: Indicates that the port is running at 1000M.
Amber: Indicates that the port is running at 10/100M.
Light off: No link.
Reset: Press the reset button for 5 seconds to reset the Switch back to the default settings. All previous
changes will be lost.

Rear Panel

Figure 4 – DGS-1100-24 Rear Panel
Power: Connect the supplied AC power cable to this port.
3