Contents Safety precautions..... 3 Maintenance of the hair dryer ....9 Parts identifi cation ......6 Troubleshooting ........ 11 How to use the hair dryer ....7 Specifi cations ........12 ....................13 ..................19 ....................16 ....................21 ..............17 ......................22 EH-NA9N SEHNA9N13503-1.indb 2 EH-NA9N SEHNA9N13503-1.indb 2 13/9/2567 BE 10:30 13/9/2567 BE 10:30...
• Please read the code on the cover for the detailed operating instructions. ►Plug and Cord • nanoe™ is a trademark of Panasonic Holdings Corporation. • Do not use with the cord bundled. • nanoe™ particles are nano-sized electrostatic atomized •...
Page 4
• Never modify, disassemble, or repair. WARNING - Doing so may cause ignition or injury due to abnormal operation. Contact an authorized service center for repair. • If the supply cord is damaged, it must be replaced by the • Do not handle any part of the plug or appliance with wet manufacturer, its service agent (described in the warranty), hands.
Page 5
►Notes CAUTION • This hair dryer is equipped with an automatic overheating protective device. If the hair dryer overheats, it will switch to ►To protect your hair cool air mode. Switch off the hair dryer and unplug it from the household outlet. Allow it to cool down for a few minutes •...
Parts identification A Air outlet Quick-dry nozzle B Mode indicator C Air inlet D Mode switching button E Ion charge plus panel F Ring for hanging G Bushing H Cord I Plug J Handle K Power switch : Turbo (Very strong airflow) : Dry (Strong airflow) : Set (Gentle airflow) : Off...
• On all modes, an airflow enriched with nanoe™ and mineral How to use the hair dryer will be provided. Use only with AC 110 V power supply. Mode control Turn the power switch on. To change the mode, press the mode switching button. •...
Page 8
To increase hair volume with a diffuser Scalp Care mode Move the diffuser in a circular motion and hold for a few seconds. Do this after drying your hair by about 70% following procedure 2 on P.7 Skin Care mode To set your hair Dampen the area of your hair you Do this after drying your hair.
Maintenance of the hair dryer Maintaining the air inlet Do this about once a month or more Always turn the power switch off and disconnect the Wipe to clean lint, hair, plug from the household outlet. (Except when performing or other matter from the maintenance on the air outlet) air inlet with a tissue or toothbrush.
Page 10
Maintaining the nanoe outlet and the mineral Maintaining the main body ion outlet. Do this when dirty To clean the hair dryer (when it is dirty), soak At least once a month a cloth in the soapy water and squeeze it out In order to maintain the generation firmly, then wipe with the cloth.
Water droplets occasionally fly out from when generating nanoe™ ; this is not outlet. an abnormality. If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorised by Panasonic for repair. EH-NA9N SEHNA9N13503-1.indb 11 EH-NA9N SEHNA9N13503-1.indb 11 13/9/2567 BE 10:30...
Specifications Power source 110 V 60 Hz Power consumption 1 200 W (When used in [HOT] [III] setting.) Accessories Concentrator nozzle, Diffuser This product is intended for household use only. EH-NA9N SEHNA9N13503-1.indb 12 EH-NA9N SEHNA9N13503-1.indb 12 13/9/2567 BE 10:30 13/9/2567 BE 10:30...
Need help?
Do you have a question about the nanoe EH-NA9N and is the answer not in the manual?
Questions and answers