ICU Medical Hotline HL-90 Product Reference Manual

Important: Please refer to the Operator's Manual supplied with the product for detailed
instructions, contraindications, warnings and cautions, and the appropriate IFU for specific
information on using disposable sets.
Warning: Prime the recirculating solution path before connecting to the intravenous
extension set, to confirm there is no breach between the recirculating solution path and the
intravenous path.
Step 1
Plug the twin-tube connector on the
>
Hotline fluid warming set into the socket.
Step 3
Connect the IV fluid and the intravenous
>
administration set to the Hotline fluid
warming set.
Fully prime the intravenous
>
administration set and the Hotline
fluid warming set prior to connecting
to the patient.
Rx Only. For safe and proper use, refer to the appropriate manual, guide, or instructions for use.
Figures are rendered as graphic representations to approximate actual product.
© 2023 ICU Medical Inc. | www.icumed.com | US-ED04-0440-0623 | For Distribution
Hotline™ Fluid Warming Sets (L-70, L-70NI, L-80)
L-70
Product Reference Guide
Hotline™ Fluid Warmer (HL-90)
Step 2
Turn ON the power switch.
>
Inspect the patient end of the Hotline
>
fluid warming set for leaks to confirm the
integrity of the intravenous pathways.
Step 4
After use, turn OFF the power switch.
>
Remove the Hotline fluid warming set
>
and insert the reflux plug into the socket.
| Page 1 of 2
Step-by-Step Guide
800.824.7890 | www.icumed.com