Subscribe to Our Youtube Channel
Related Manuals for Sony BVMK-R10
Summary of Contents for Sony BVMK-R10
- Page 1 5-062-848-11(2) Monitor Control Unit Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. BVMK-R10 Software Version 1.0 © 2024 Sony Corporation...
-
Page 2: Table Of Contents
Table of Contents Usage Precautions ..........3 Available Monitors and Functions ..... 5 Location and Function of Parts ......7 Front Panel ..........7 Rear Panel ..........10 Handling a USB Memory Stick ......11 Notes on USB Memory Sticks ....11 Mounting the Unit in a Rack ......12 Connections ............12 Supplying DC 12V/Connecting One... -
Page 3: Usage Precautions
WARRANTY, OR FOR ANY OTHER REASON network, as security issues may occur. WHATSOEVER. M-E651-00_v000-04_BVMK-R10_202407171043_GB_10/10 • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES. • SONY WILL NOT BE LIABLE FOR THE... - Page 4 On the Screen Saver This unit has a screen saver function to reduce burn-in. If “Screen Saver” in the “System” menu is set to a setting other than “Off”, the screen will be hidden after a certain time has passed in the no- operation condition.
-
Page 5: Available Monitors And Functions
Available Monitors and Functions The monitors that can be connected to the unit are the following. Monitors which can be connected Model name/Series name Group BVM-HX3110 BVM-HX310 BVM-E251/BVM-E171 PVM-X3200/PVM-X2400/PVM-X1800 BVM-X300 Functions which can be used Available functions are based on the latest software version for each model at the time when this document is issued. - Page 6 7) For monitors in group A and D, make sure to use the USB connector on the monitor when using the USB memory stick such as by updating the monitor firmware or reading the User LUT file. For monitors in group B and C, use BKM-17R.
-
Page 7: Location And Function Of Parts
Location and Function of Parts For functions available with your monitor, see page 5. Front Panel OPERATE lamp When the CONTROLLER button is turned on, the The indicator displays the power status as NUMERIC button is fixed to be on. follows. - Page 8 You can also use the monitor menu to assign Each time one of MANUAL buttons is pressed, various functions. For details, refer to the manual the indicator (green) on the button turns on/off. of your monitor. When turning the button on, it is possible to manually adjust APERTURE (image sharpness), When the NUMERIC button is set to on: CHROMA (color saturation), BRIGHTNESS (black...
- Page 9 While the unit is in use, the OPERATE lamp on the When the monitor menu is displayed, press front panel may show error signals. this button to move to the menu in the upper If an error display appears, refer to a Sony layer. qualified service personnel. MENU button Press this button to display the monitor menu.
-
Page 10: Rear Panel
Rear Panel DC 12V connector Connect to the DC 12V OUT connector of the monitor by using the supported cables or connect the output cable of the AC adapter supplied with the unit. Supported cables vary depending on the monitor. -
Page 11: Handling A Usb Memory Stick
Notes Handling a USB Memory Stick Image data may be damaged in the following cases: – If you eject the USB memory stick, or turn the This unit has a USB connector. Proceed as unit off while accessing the data illustrated to insert and eject a USB memory stick –... -
Page 12: Mounting The Unit In A Rack
Attach the rack mount brackets to each side of the unit with the rack mount bracket attachment screws. BVMK-R10 (this unit) Rack mount bracket Rack mount bracket attachment screws After connecting the cable to the DC 12V Screw the rack mount brackets to the rack to connector, set the attachment to the unit. -
Page 13: Supplying Dc 12V/Connecting One Monitor
DC 12V OUT connector SMF-17R20, etc. LAN connector DC 12V connector BVMK-R10 (this unit) NETWORK switch: Set to PEER TO PEER. Turn off the power switch of the monitor before connecting the unit. Set the NETWORK switch of the monitor and the unit to PEER TO PEER. -
Page 14: Supplying Dc 12V/Connecting Multiple Monitors With Lan
The unit controls up to 32 monitors. Up to three When an optional LAN cable is connected, Sony monitor control units (controllers) are use a shielded-type cable to prevent a connected to one monitor in single mode. malfunction due to noises. -
Page 15: About The Menu Display Screen
Remote connection mode is displayed. ID About the Menu Display No. of each connection mode is also displayed for single connection and group Screen connection. P to P: Peer to Peer connection SGL xx: Single connection (xx: Monitor ID ... - Page 16 Turn the SELECT/ENTER control to select a To enter values menu, then press the SELECT/ENTER control. Turn the SELECT/ENTER control to select a The first layer of the selected menu appears. value. SGL 01 Press the SELECT/ENTER control or F12/Ent Connection button.
-
Page 17: Menu Items
To clear the menu Menu Items Press the MENU button while the CONTROLLER button is turned on. The menu of this unit consists of the following The menu closes automatically if a button is items. not pressed for one minute, and the remote connection status screen appears. -
Page 18: Connection Menu
When you want to control the only specified Connection Menu monitor, use the single connection. When you want to control the specified group, use the group connection. When you want to control all monitors, use all You can configure the settings for connecting the connection. -
Page 19: Network Menu
Network Menu F Key Menu You can configure the network settings for the You can assign functions to the function buttons unit. of the unit. This setting can also be made with the monitor This assignment can also be made with the menu. -
Page 20: System Menu
This menu is used when the unit firmware is updated via a USB memory stick. Download an update file from the Sony website, extract the file then You can configure the system of the unit and store the files in the root folder of a update the firmware. -
Page 21: Status Menu
Model Name The model name is displayed. comes after all connection). If the monitor ID No. BVMK-R10 and group ID No. are set or all connection is Serial No. The serial number is displayed. selected in each menu, the remote connection is... - Page 22 Transition of the remote connection selection menu Each time you press the SGL/GP/ALL button, the menu moves to the direction of the arrow. SGL 01 Single Press enter to confirm. SGL 01 Group Press enter to confirm. SGL 01 Press enter to confirm.
-
Page 23: Troubleshooting
Troubleshooting This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support. Symptom Cause Remedy The unit cannot be operated A function that does not work is assigned Display the “F Key” menu (page 19) and to a function button. -
Page 24: Specifications
Specifications Dimensions Input/Output Front LAN (100BASE-TX) connector RJ-45 × 1 DC 12V connector Circle pin × 1 USB (USB 2.0) connector USB Standard A × 1 General Power requirements DC IN: 12 V, 0.5 A (supplied with the connected monitor or the connected AC adapter) Current consumption 12 V DC, 0.5 A... -
Page 25: Notices And Licences For Software Used In This Product
Length of M4 screws (side of the unit, rack mount NOTICES AND LICENCES FOR bracket) SOFTWARE USED IN THIS ) to 12 ( PRODUCT The following is the software license information used by this unit. M4 screw Unit cabinet Attached object Length of M3 screws (rear side of the unit, DC-cord secure connection attachment) ) to 6 (... - Page 26 LibTomCrypt and LibTomMath are written by Tom St uSSH (Secure Shell) SDK Denis, and are Public Domain. ============== Copyright (C) 2009-2019 Cypherbridge Systems, LLC. svr-authpubkey.c and svr-authpubkeyoptions.c are from All Rights Reserved. OpenSSH 3.6.1p2, and are licensed under the 2 point www.cypherbridge.com BSD license.
- Page 27 and the following disclaimer in the that all components are under a BSD licence, or a documentation and/or other materials provided licence more free than that. with the distribution. * Neither the name of Google Inc. nor the names of OpenSSH contains no GPL code.
- Page 28 The legal status of this program is some @version 3.0 (December 2000) combination of all these permissions and restrictions. Use only at your own responsibility. Optimised ANSI C code for the Rijndael cipher You will be responsible for any legal consequences (now AES) yourself;...
- Page 29 Redistribution and use in source and binary the following disclaimer in the documentation and/ forms, with or without modification, are or other materials provided with the distribution. permitted provided that the following conditions * Neither the names of PolarSSL or XySSL nor the are met: names of its contributors may be used to endorse or 1.
- Page 30 Sony Corporation...
Need help?
Do you have a question about the BVMK-R10 and is the answer not in the manual?
Questions and answers