Casio CTK-4200 User Manual page 67

Symptom
The metronome does not sound.
Notes keep sounding, without stopping.
Some notes are cut off while they are playing.
The volume or tone setting I made has changed.
Output volume does not change even though is
change my keyboard touch.
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
With some tones, octaves do not change at the far
ends of the keyboard.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
The reverb of notes seems to change suddenly.
Operation
When I perform a skip forward or skip back
operation, the skip operation moves multiple song
measures instead of only a single measure.
Tone, rhythm, and other settings revert to their initial
defaults whenever you turn on the Digital Keyboard.
Computer Connection
I can't exchange data between the Digital Keyboard
and a computer.
B
Action
• Check and adjust the accompaniment volume setting (page E-42).
• Check and adjust the song volume (page E-30).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-10).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-10).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-9).
Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction.
• Adjust the volume setting (page E-10).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-10).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-9).
• Change the Touch Response setting (page E-12).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-10).
This is due to system limitations. It does not indicate malfunction.
This is due to system limitations. It does not indicate malfunction.
• Check and adjust the transpose (page E-17) and tuning settings
(page E-17).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-10).
• Check and adjust the reverb setting (page E-16).
• Turn power off and then back on to initialize all Digital Keyboard
settings (page E-10).
While song playback is stopped or a Step Up Lesson is in progress,
skip forward and skip back operations are performed in phrase units
(page E-28).
Though Digital Keyboard settings reset when you turn off the Digital
Keyboard, you can save setups to registration memory for instant
recall whenever you need them (page E-48).
• Check to make sure that the USB cable is connected to the Digital
Keyboard and computer, and that the device is selected correctly
with your computer's music software settings (page E-59).
• Turn off the Digital Keyboard and then exit the music software on
your computer. Next, turn the Digital Keyboard back on and then
restart the music software on your computer.
Reference
E-65