Table of Contents
Advertisement
Editing Auto Accompaniment Patterns
3.
Press a button from
Accompaniment Pattern you want to edit.
The name of the pattern will appear on the display.
D r m : R h
8
Variation selected
Pattern selected by each button
6
: Intro
7
: Normal, Normal Fill-in
(Each press toggles the selection.)
8
: Variation, Variation Fill-in
(Each press toggles the selection.)
9
: Ending
bl
4.
Press
to select the instrument part you want
to edit.
The part number of the part you select will flash on the
display.
Flashing: Part selected for editing.
Parts that contain data.
bo
5.
Press
(RHYTHM).
This will display the rhythm name.
br
6.
Use the
(10-key) [–] and [+] keys to select
the rhythm number you want to assign to the
instrument part you are editing.
A different rhythm number is assigned for each instrument
part.
• You can play the data of the currently selected rhythm
number by pressing
• All of the eight instrument parts of an intro (I-1 to 8)
must have the same rhythm number. If you assign
rhythm 003 to I-1, for example, 003 also will be
assigned automatically to parts I-2 through I-8. If you
then assign rhythm 004 to part I-2, for example, I-1 and
all of the other parts also will change to 004. All of the
eight parts of an ending (E-1 to E-8) also must have the
same rhythm number.
E-46
6
9
to
to select the
y
Part 6 (Chord 3)
bk
.
7.
To edit the other contents, press
(FUNCTION) to display the screen for the
setting you want.
ct
• Each press of
(FUNCTION) will cycle through the
settings shown below, from 1 through 6.
br
• Use the
(10-key) [–] and [+] keys to change the
currently selected setting.
• You can play the current settings of the editable part by
bk
pressing
.
Setting Type
1 Part on/off
2 Tone number*
3 Volume level
Left-right speaker
4
balance (panning)
Reverb depth
5
(reverb send)
Chorus depth
6
(chorus send)
* Instrument parts 1 and 2 can be assigned drum set tones
only.
8.
Repeat steps 4 through 7 as many times as
necessary to edit the parts you want for the
pattern you selected in step 3.
• If you change the rhythm number in step 6, the editable
contents (1 through 6 in the above table) you last
configured in step 7 of this procedure will be overwritten
with the settings of the newly selected rhythm.
9.
Repeat steps 3 through 8 as many times as
necessary to edit the accompaniment patterns
you want (intro through ending).
10.
4
Press
.
This will display a message asking if you want to save the
user rhythm.
ct
Display
Settings
Part
On/Off
Tone
001 - 583
Vol.
000 - 127
–64 - 0 - + 63
Pan
Rvb
000 - 127
Cho.
000 - 127
Hide quick links:
Advertisement
Table of Contents
