Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DeWalt DCD706D2 T
Summary of Contents for DeWalt DCD706D2 T
- Page 1 DCD701 DCD706...
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A XXXX XX XX Fig. B...
- Page 4 Fig. C Fig. D Fig. E Fig. F...
-
Page 5: Technical Data
English SUB-COMPACT DRILL/DRIVER/HAMMERDRILL DCD701, DCD706 Congratulations! WARNING: The declared vibration and/or noise emission level represents the main applications of the tool. However You have chosen a D WALT tool. Years of experience, thorough if the tool is used for different applications, with different product development and innovation make D WALT one of the accessories or poorly maintained, the vibration and/or... -
Page 6: Definitions: Safety Guidelines
English Batteries Chargers/Charge Times (Minutes) Weight DCB104 DCB107 DCB110 DCB112 DCB113 DCB115 DCB116 DCB132 DCB119 Cat # DCB122 0.22 DCB124/G 0.25 DCB125 0.20 DCB126/G 0.46 DCB127 0.22 The Supply of Machinery (Safety) Regulations, 2008, S.I. Denotes risk of electric shock. 2008/1597 (as amended), Denotes risk of fire. -
Page 7: Personal Safety
English f ) If operating a power tool in a damp location is tool or these instructions to operate the power tool. unavoidable, use a residual current device (RCD) Power tools are dangerous in the hands of untrained users. protected supply. Use of an RCD reduces the risk of e ) Maintain power tools and accessories. -
Page 8: Residual Risks
English • Risk of personal injury due to flying particles. b ) Never service damaged battery packs. Service of battery packs should only be performed by the • Risk of burns due to accessories becoming hot manufacturer or authorized service providers. during operation. •... -
Page 9: Charger Operation
English CAUTION: Children should be supervised to ensure that Charging a Battery (Fig. B) they do not play with the appliance. 1. Plug the charger into an appropriate outlet before inserting NOTICE: Under certain conditions, with the charger battery pack. plugged into the power supply, the exposed charging 2. -
Page 10: Important Safety Instructions For All Battery Packs
English Contents of opened battery cells may cause respiratory Wall Mounting • irritation. Provide fresh air. If symptoms persists, seek These chargers are designed to be wall mountable or to sit medical attention. upright on a table or work surface. If wall mounting, locate the WARNING: Burn hazard. -
Page 11: Package Contents
English the latest regulations for packaging, labeling/marking and Battery Type documentation requirements. The following tools operate on a 12 volt battery pack: The information provided in this section of the manual is DCD701, DCD706. provided in good faith and believed to be accurate at the time These battery packs may be used: DCB122, DCB124, DCB124G, the document was created. -
Page 12: Intended Use
English Description (Fig. A) Fuel Gauge Battery Packs (Fig. B) Some D WALT battery packs include a fuel gauge which consists WARNING: Never modify the power tool or any part of it. of three green LED lights that indicate the level of charge Damage or personal injury could result. -
Page 13: Operation
English nOTE: The first time the tool is run after changing the direction one hand while holding the tool with the other. Your tool is equipped with an automatic spindle lock mechanism. This of rotation, you may hear a click on start up. This is normal and does not indicate a problem. -
Page 14: Maintenance
English Recommendations for hammerdrilling 2. Pull the trigger switch applying pressure in a straight line with the bit until the fastener is seated at the desired depth • Too much force will cause slower drilling speeds, in the workpiece. overheating, and a lower drilling rate. Recommendations for screwdriving •... -
Page 15: Protecting The Environment
English Protecting the Environment Separate collection. Products and batteries marked with this symbol must not be disposed of with normal household waste. Products and batteries contain materials that can be recovered or recycled reducing the demand for raw materials. Please recycle electrical products and batteries according to local provisions. - Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)
Need help?
Do you have a question about the DCD706D2 T and is the answer not in the manual?
Questions and answers