Factory Reset / Force Shutdown & Restart - Positive Grid Spark 2 User Manual

Factory Reset
Follow the steps below to perform a factory reset. This process will reset all the presets stored on the Spark 2
as well as Bluetooth and power saving settings.
1. Turn off your Spark 2.
2. Hold the Power Button and Preset Knob at the same time and then release the buttons when the Power
Indicator turns white.
3. Hold the Power Button, until all four preset LEDs blink, then release.
4. Spark 2 will turn off automatically and will return to its factory settings when powered back on.
*You may cancel the factory reset up until step 2 by tapping the Power Button.
Force Shutdown & Restart
If Spark 2 becomes unresponsive, freezes, or emits unusual noises, follow these steps to force a shutdown
and restart:
1. Hold the Power button for over 10 seconds.
2. Release the Power button, then press and hold it again to turn Spark 2 back on.
14