TECPEL 512 Operating Instructions

TECPEL 512 C€
INFRARED THERMOMETER
WITH LASER MARKER
ELECTRICAL
Display Resolution: 1°F / 1°C
Response Time: 1 second
Emissivity: 0.10 to 1.00 by step of 0.01
Detection Element: Thermopile
Optical Lens: Fresnel Lens
Sighting: 1-beam laser marker < 1mW (class 2)
Field of View: 100mm@ at 1000mm (3.9"Ø at 39.0")
Diameter of spot (Inch)
eo
Distance to object Cinch)
INTRODUCTION
This instrument is a portable easy to use 3 digit, compact-
sized digital infrared thermometer with laser sighting de-
signed for simple one hand operation. Meter comes with
Backlit LCD display, Auto-hold function and auto power
down (20 seconds approx.) after releasing MEAS button to
extend battery life.
SAFETY INFORMATION
A DANGER
Pressing the & button turns the laser beam on and off.
Exercise extreme care and do not allow the laser beam
to enter your eye or those of any other person or animal.
® Donotlook directly into the laser light from the optical
system.
OPERATING INSTRUCTIONS
Auto Power-down function
If unused for about 20 seconds, the meter will
power-down automatically. Press MEAS button switch to
resume power-on mode.
Turning the Power on
When the power is down, press MEAS button to turn on
the meter.
The values and settings on the LCD return to what they
were before the power was last turned off.
NOTE: If, from the power down condition, the MEAS
button is held down for more than four second,
measurement starts.
X% Display Back-Light Button