Daily Check; Daily Use - Whirlpool ADG 7445 Quick Reference Manual

Filling the salt reservoir - Dissolve limescale (not necessary if water hardness level is set to "soft"!)
1
Visual indicator
(depending
on model).
Unscrew cap.
The salt level indicator lamp may remain lit for the duration of several wash cycles. If the
water hardness level falls within category (soft), no salt is required.
Adding rinse aid (not necessary when you use tablets). How to adjust the rinse aid dosage regulator
2
Visual
indicator
If required,
open the cover
B (press right
https://whirlpooldishwasherusermanual.wordpress.com/
button).
Rinse aid indicator (depending on model)
Only use rinse aids recommended for use in domestic dishwashers. Immediately wipe away any rinse aid spilt accidentally. This prevents the formation of excess suds which can cause a fault function of the appliance.
If there are streaks: reduce the dosage by turning the dial to a lower setting (1-3). If crockery is not perfectly dry: increase the dosage by turning the dial to a higher setting (5-6). Plastic dishes have more difficulty drying and a higher rinse aid
setting will not improve the situation.
Detergents with rinse aid incorporated may be effective only with longer programmes. In the case of shorter programmes, detergent residue may be a problem (if necessary, use powder detergent). Detergents with rinse aid incorporated tend
to form excess suds.
Adding detergent - Use only detergent specifically for dishwashers in accordance with the supplier's recommendations
3
Get More Manual http://www.pdflook.com/
Fill the salt
reservoir with
water before the
first wash only.
Salt indicator
(depending on
the model)
The indicator lamp on the control panel lights up when RINSE AID NEEDS TO BE
ADDED.
Open the cover A Only fill the
(press left button). detergent dispenser
prior to starting a
wash programme.
The indicator lamp on the control panel lights
up when SALT NEEDS TO BE ADDED.
The rinse aid dosage can be adjusted to the
detergent used. The lower the setting,
the less rinse aid is dispensed
(factory setting: position 4).
Press the button to open the cover B. Using a
coin or similar object, turn the arrow to the
Add rinse aid
desired setting. After adjusting the rinse aid
to the max.
setting, shut the cover again.
line ~150 ml
Tablet / gel / powder
Use only one tablet per one
cycle, only placed in detergent
dispenser.
All types of tablets can be
used, but for 2 in 1 type
adding of salt is mandatory.
Visual indicator (depending
Add salt
on model). Screw on the cap.
(never add
Salt residues around cap
detergent!).
need to be removed.
min. 1.5 kg
max. 2 kg
orange: OK.
dark: OK. clear: NEEDS TO BE ADDED
By pressing
dedicated ribs
shut the cover.

Daily check

clear: NEEDS TO BE ADDED

Daily use

GB -3-