First Time Use - Whirlpool ADG 7445 Quick Reference Manual

How to set detergent type: powder/gel/tablet (if option is available)
In order to always ensure the best cleaning
results, you NEED to set:
DETERGENT type and WATER HARDNESS.
https://whirlpooldishwasherusermanual.wordpress.com/
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray arms
Get More Manual http://www.pdflook.com/
1. Select 3rd programme 2. Press START button
(see Table of programmes for 7 seconds
- page 1)
For models without "detergent type" option, the salt and rinse aid indicators will be lit when tablets are used.
How to set water hardness
* only before the first wash or if the
water hardness has been changed
1. Ask your water supply company what the water hardness is... 2. ...enter this value on your
German French English Water
degrees °dH degrees °fH degrees °eH hardness
0 - 5 0 - 9 0 - 6.3
6 - 10 10 - 18 7 - 12.6 Medium
11 - 15 19 - 27 13.3 - 18.9 Average
16 - 21 28 - 37 19.6 - 25.9 Medium-hard
22 - 28 38 - 50 26.6 - 35
29 - 35 51 - 63 35.7 - 44.1 Very hard
Extremely
36 - 60 64 - 107 44.8 - 74.9
3a. Check your 3b....and set it on your dishwasher
detergent type... using the START button
(as per table below)
Dishwasher models
Detergent
model without
types
model with display
display
Powder or gel
3h 6h 9h
(factory setting)
Tablet 2 in 1
Tablet 3 in 1
Tablet All in 1
Switch on the appliance
- Select the 2nd programme "P2" - consult the table of programmes.
- Press the START button for at least 5 seconds until the START indicator lamp flashes.
- The water hardness setting is shown on the display (if present) or the START button flashes.
- With each successive touch of the START button the setting increases and when it reaches 7 it returns to 1 again.
- The appliance must be switched off to memorise the new setting.
Suggestions for detergent use
dishwasher
Dishwasher
Dishwasher
without Gel or Powder
with display:
display: count (rinse aid and
insert value in
START button salt)
the display
led flashes
Soft 1 1x
2 2x
3 3x
go to step 1
4 4x
(see "Daily
Hard 5 5x check")
6 6x
7 7x
hard

First time use

4. Remember to use salt and rinse 5. Switch off and switch on
aid when needed (as indicated
below)
no symbol add salt add rinse aid
add salt rinse aid
salt rinse aid
Tablets Water hardness level is factory set for
medium hard water (a number "4" is
shown on the display or the START
indicator lamp flashes 4 times).
if extra salt is
Even if you use tablets which include salt,
needed go to
you must still add salt since such
step 1
(see "Daily detergents are not effective enough at
check")
softening hard water.
again to save setting
GB -2-