TP-Link UE302C User Manual page 2

Using the Adapter
This adapter supports Plug and Play feature. Plug in and wait for seconds.
Then this adapter is ready to use.
UE302C:
*
For Windows 7/8/8.1/10, please click to install a driver if prompted to do so.
For Windows 7, please click CANCEL if prompted "The program might not have installed
correctly" after installation.
For Mac OS X 10.8 to 10.15, please download and install a driver by visiting our official
website www.tp-link.com and searching the model number.
Wired Network
ATTENTION
♦ When product has power button, the power button is one of the way to shut off the product;
when there is no power button, the only way to completely shut off power is to disconnect
the product or the power adapter from the power source.
♦ Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
♦ Keep the device away from water, fire, humidity or hot environments.
♦ This equipment can be powered only by equipments that comply with Power Source Class 2
(PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.
♦ Maximum wired data throughput rates are the physical rates derived from IEEE Standard
802.3 specifications. Actual wired data throughput is not guaranteed and will vary as a result
of environmental factors, Ethernet cable class, and computer performance.
♦ Peak performance is attainable only with Cat5e or higher Ethernet cables.
RJ45 Port
USB-C Port
*use UE302C as illustration
computer