Download Print this page

Red Arrow Zenith ZENA-CCT Installation Instructions

Wallpacks

Advertisement

Quick Links

Safety Warning
The installation should be carried out
by a qualified electrician in compliance
with the current edition of the IEE
Wiring Regulations.
Prior to installation, carry out the
necessary risk assessment considering
the people who could be at risk,
the level of risk and the precautions
required to control the risk
Ensure that the circuit supply is
isolated either by the circuit supply
fuse being removed or the applicable
Specification
Box Contents -
1 x Zenith Wallpack
Dimensions:
L: 265 x W: 319 x D: 165mm
Material:
Aluminium Body & Polycarbonate Diffuser
Working
Standard: -20°C - 40°C
Temperature:
Emergency: 0°C - 40°C
Flicker Free Driver
Included:
Fast Fit Terminal Block
Surface Mount Bracket
13/
220-
18/28
240V
WATT
1700/
IP65
2500/
3500LM
MAXIMUM FITTINGS PER CIRCUIT
Automatic Circuit Breaker Type:
Rated Current:
Cable (mm):
ZENA-CCT
ZENAE-CCT
ZENAPC-CCT
ZENAEPC-CCT
Installation Instructions
1.
Before starting the installation, please ensure the mains power is turned off.
2.
Select a suitable location for the installation & drill fixing holes in the wall according to the dimensions of Zenith and the mounting bracket. A drilling
template is provided in the box.
2
INSTALLATION INSTRUCTIONS
Zenith Wallpacks
Product Codes: ZENA-CCT, ZENAE-CCT, ZENAPC-CCT, ZENAEPC-CCT
3000K/
LED
4000K
7
IK10
YRS
GUARANTEE
B6
B10
B13
B16
B20
6A
10A
13A
16A
20A
1.5
1.5
1.5
2.5
2.5
27
46
60
73
90
23
42
56
69
86
25
44
58
71
88
21
40
54
67
84
circuit breaker being turned off before
installation or any maintenance.
Check the total load on the circuit
ensuring the luminaire does not exceed
the rating of the circuit cable, fuse or
circuit breaker.
Long-term use and voltage fluctuations
can reduce the life span of the fitting.
If the fitting incorporates control gear,
ensure careful sizing to avoid instances
of nuisance tripping of the protective
device used in the installation.
C10
C13
C16
C20
10A
13A
16A
20A
1.5
1.5
2.5
2.5
46
60
73
90
42
56
69
86
44
58
71
88
40
54
67
84
Follow the provided installation
instructions, using the fixings supplied
or recommended.
Keep out of reach of children.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Zenith ZENA-CCT and is the answer not in the manual?

Questions and answers

Summary of Contents for Red Arrow Zenith ZENA-CCT

  • Page 1 INSTALLATION INSTRUCTIONS Zenith Wallpacks Product Codes: ZENA-CCT, ZENAE-CCT, ZENAPC-CCT, ZENAEPC-CCT Safety Warning • • The installation should be carried out circuit breaker being turned off before Follow the provided installation by a qualified electrician in compliance installation or any maintenance. instructions, using the fixings supplied with the current edition of the IEE or recommended.
  • Page 2 Fix the mounting bracket to the wall. Remove the diffuser from the fitting by unscrewing the 3 screws. Cable entries are provided on the back and side of the luminaire. Slot the fitting on to the Mounting Bracket. Fix the top of the fitting to the wall using suitable fixings. Connect the cable to the terminal block, please see below for emergency &...
  • Page 3 When this fitting comes to the end of it’s life or you choose to replace it, please do not dispose of it with your normal waste. Please recycle where the facilities exist, check with your local authority for suitable options. INS/OUTDOOR/0007/ZEN/V5 Red Arrow Electrical Ltd T: 0800 195 0006 redarrowelectrical.co.uk Cortonwood Drive, Brampton, sales@redarrowelectrical.co.uk...

This manual is also suitable for:

Zenith zenae-cctZenith zenapc-cctZenith zenaepc-cct