Setting Auto-Selection Of The Input Signal [Input Signal] - Eizo FlexScan S1932 User Manual

●

Setting auto-selection of the input signal [Input Signal]

Enable : When either PC is turned off or enters the power-saving mode, the
monitor automatically displays signals of another PC.
Disable : The monitor does not detect the PC's signals automatically. Switch an
input signal with
(1) Press .
The adjustment menu appears.
(2) Select (Tool).
(3) The Enable/Disable setting is toggled by selecting
Enable
Disable
(4) Select .
The mode selected is set.
.
• When "Enable" is selected for [Input
(Input Signal).
Chapter 3 Connecting Cables
NOTE
Signal], the monitor's power-saving
function works only when the two
PCs are in the power-saving mode.
23