Viewer Auto Setting All Together - Eiki LC-X71 Owner's Manual

Viewer auto setting all together

"Viewer auto display" can be set all together. Set "ON" the
multi control setting and select [3] Auto display from
Viewer sub menu (selected by 'Multi-control' - "Network
Viewer" menu). Set the display time periods and repeat
times for the auto image display. When clicking Start but-
ton, the registered projectors start playing back the auto
image display in sequential.
For further information of the Auto display, see "Using the net-
✐
work viewer function". (+p.98)
This is effective only if the multi control item of the registered
✐
projector sets to either "Both control" or "Visual control".
Multi-control
Pj-to NetDirector
OWNER'S MANUAL [X71 Series]
7