Related Manuals for Superchips Flashpaq F5
Summary of Contents for Superchips Flashpaq F5
- Page 1 Quick Install Guide for the 2015 Jeep JK Flashpaq If you plan on tuning your Jeep, please review the contents of this Guide and follow its instructions before connecting your device.
- Page 2 Saving Stock Files The first thing you need to do is properly save your stock files to Once the stock file has been saved, the Flashpaq will inform you the Flashpaq. Please follow these instructions: that your vehicle requires an un-lock to continue with the tuning process.
- Page 3 In order to un-lock the Flashpaq for tuning, the device will need to be updated using the Ignition Update Software. STEP 1 - Using a windows based computer go to www.superchips.com STEP 2 - Select the UPDATES tab located at the top of the page.
- Page 4 They will then evaluate the information given and walk you being updated. Once the update is complete, you will through the “ECM Swap”. (see following section) be informed that it is safe to disconnect. Superchips Technical Support Toll Free: 888-227-2447 Monday-Friday_8:00am - 8:00pm EST...
- Page 5 ECM Swap Options: Option 1: Cross-ship ECM swap (subject to availability of ECMs) Superchips will send you an unlocked ECM and provide a return shipper label to send us back your factory ECM. Option 2: Send in your factory ECM to be unlocked This free service will be available to you anytime.
- Page 6 3 mounting bolt locations. Make sure the ground has also been re-connected. STEP 2 - Plug the 2 ECM connectors into the Superchips ECM being careful not to damage the pin contacts. Rotate the lever to lock the connectors in place.
- Page 7 ATTENTION Upon installation of the unlocked ECM, you will likely see a check engine light. You may also experience elevated idle and no throttle pedal response on the first startup. If you shut the vehicle down and wait approximately 1 minute and then restart the vehicle, it should resume normal operation.
Need help?
Do you have a question about the Flashpaq F5 and is the answer not in the manual?
Questions and answers