Related Manuals for Superchips Flashpaq Pro
Summary of Contents for Superchips Flashpaq Pro
- Page 2 Flashpaq Pro can be used to store and load to your vehicle custom tuning files that are developed by third-parties. Powerteq LLC does not calibrate, test, verify, validate or provide custom tuning for the Flashpaq Pro.
- Page 3 POWERTEQ LLC IS NOT RESPONSIBLE FOR AND SHALL HAVE NO LIABILITY TO YOU FOR ANY CLAIMS ARISING OUT OF OR RELATING TO ANY MISAPPLICATION OF THE FLASHPAQ PRO, CUSTOM TUNES, IMPROPER USE OF CALIBRATIONS, MALFUNCTION OR LACK OF LEGAL COMPLIANCE FOR CUSTOM PROGRAMS CREATED BY THIRD-...
- Page 4 You will recieve a Contact a Calibrator “Dealer Key” from them. The Flashpaq Pro will read your vehicle’s computer and save all Use Flashpaq Pro to the origional stock files. read vehicle stock Download the Ignition Update Software and update the device.
- Page 5 READ VEHICLE STOCK Before custom tunes can be created, you will need to save the vehicle’s stock files. STEP 1 - Plug STEP 2 - Turn STEP 3 - Follow STEP 4 - Allow the device into the ignition on, the on-screen the device to save your vehicle’s...
- Page 6 LOADING CUSTOM TUNES MANUALLY Prior to receiving custom tunes, a professional calibrator will need to be contacted. STEP 1 - After saving the stock files to your device, connect it to your computer using the supplied USB cable. STEP 2 - Locate the drive named “Powerteq”.
- Page 7 STEP 2 - Once you have downloaded and installed Ignition to your computer, double click the icon to open the software. STEP 3 - Connect the Flashpaq Pro to your computer using the supplied USB cable. (NOTE: Ignition will automatically recognize your device.) STEP 4 - When the “Update Now?”...
- Page 8 STEP 6 - When the registration form appears, fill out all required information. STEP 7 - Click the submit button. STEP 8 - When the “Update Now?” screen re-appears in Ignition, select the Yes button. (NOTE: During the update process, your device will send the stock file data to the calibrator.) CAUTION: Do Not unplug the de-...
- Page 9 PROGRAMMING USING CUSTOM TUNES STEP 1 - Plug the device into the OBDII port. (The device will automatically power-on once it has been connected.) NOTICE Do not remove or bump the OBD-II connector during any programming sequence. If you do, the vehicle may not start. WARNING Do not program your vehicle while parked in unsafe locations including heavy traffic or places without cell phone service...
- Page 10 STEP 2 - Enter STEP 3 - Turn STEP 4 - Follow STEP 5 - Select the Tuning Menu the ignition on, the on-screen the Stock option by pressing OK. but do not start instructions. from the list. the engine. Select Tuning Select Tuning Custom Tune 1...
-
Page 11: Returning Your Vehicle To Stock
RETURNING YOUR VEHICLE TO STOCK STEP 1 - Plug STEP 2 - Enter STEP 3 - Turn STEP 4 - Select the Tuning Menu the ignition on, the Stock option the device into by pressing OK. but do not start from the list.
Need help?
Do you have a question about the Flashpaq Pro and is the answer not in the manual?
Questions and answers