Attaching Brackets To The Router - Cisco 1760 - VPN Bundle Router Hardware Installation Manual

Chapter 2 Installation

Attaching Brackets to the Router

78-13342-03
Figure 2-1 Bracket Mounting Points
19" rack
mount point
19" rack
mount point
To install the router in a 19-inch or a 24-inch standard rack, follow the instructions
described in these procedures:
Attaching Brackets to the Router
•
Attaching Brackets to the Rack
•
The bracket orientation and the screws you use depend on whether a 19-inch rack
or a 24-inch rack will be used. Use two of the supplied screws to attach each
bracket, according to the following guidelines:
For a 19-inch rack, use the supplied number-8 Phillips flat-head screws to
•
attach the long side of the bracket to the router.
For a 24-inch rack, use the supplied number-8 Phillips truss-head screws to
•
attach the short side of the bracket to the router.
Figure 2-2 shows how to attach the brackets to the two sides of the router with the
front panel forward.
Cisco 1760 Modular Access Router Hardware Installation Guide
Mounting the Router in a Rack
24" rack
mount point
24" rack
mount point
2-3