Before You Begin - Cisco 12406 Replacement Instructions Manual

Figure 4
CI SC O 12
00 0
GIG AB IT
SW ITC H
RO UT ER

Before You Begin

You will need to remove all the components except the air filter from the defective chassis and reinstall
them in the replacement chassis. The recommended procedures are as follows:
•
•
•
•
•
78-16109-01
Connecting an ESD-preventive Wrist Strap to the Chassis
GIG AB
IT RO UT
SERI ES
The replacement chassis has been removed from its shipping packaging and placed temporarily
within reach of the rack in which the defective chassis is installed or near the surface where the
defective chassis rests.
The replacement chassis is connected to the same grounding system as the defective chassis.
You have prepared a place to set the defective chassis when it is removed from the equipment rack
or stable flat surface.
Components are transferred from the defective chassis to the replacement chassis.
The replacement chassis (with all the components now installed in it) is inserted into the same
equipment rack or on a stable flat surface in place of the defective chassis.
E PRO CE
SSO R
Cisco 12006 and Cisco 12406 Router Chassis Replacement Instructions
7