Appendix D - Router's Configuration - TRENDnet VIP-L16 Configuration Manual

Appendix D – Router's configuration
To configure port forwarding on a router so it can access VortexIP, the following considerations
have to be taken into consideration.
You need to know the following values, which can be found under system configuration:
• Web Port
• Transmission Port
•
Event Port
These ports have to be accessible from remotely, as shown below:
Web Port
Transmission
Events Port
The only port that has to be match is the transmission port. The Web port is necessary to
access the user's interface. This number can be changed. The Event port is only necessary when
you want to record the cameras from the Internet.
Example:
Equipment:
TEW-672GR
Hardware Version: V1.0R
Firmware Version: 1.0.1.11, 15-August-2008
IP Address: 192.168.10.1
TV-IP422W
Hardware Version: A1.0R
Firmware Version: 1.00 Build 26
IP Address: 192.168.10.200
Server
Operating System: 2003 Server
IP Address: 192.168.10.250
Configuration:
Step 1: Log into the TV-IP422 by entering http://192.168.10.200 into a browser. The default user
name is admin with a password of admin.
Step 2: Click on "Setup" on the left hand side, click "Network" and then click "Network".
Step 3: Enter 90 in the HTTP port field and then click "Apply".
Recorder Ports
80
9000
9090
Router's Port Forwarding
8080
9000
9091
31 of 41