Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ranger design 6013-3
Summary of Contents for Ranger design 6013-3
- Page 1 INSTALLATION GUIDE 19 - 1/8" 15" 43 - 1/4" 13 - 5/8" 6013-3 Steel Bottle Holder...
-
Page 2: Required Items
Description Qty. 6098 Black Strap 40-715 Bracket Top Tray 53-2000 53-205 Steel Bottle Holder 94-6033 Customer Assembly Fastener Kit 96-6033 Customer Install Fastener Kit 6013-3 Installation Guide | REV. A2 | Page 2 For technical support, contact us at 1-800-565-5321... - Page 3 #98-157 Spacers ( 2× ) 12× 12× 0.375" ID, × 1.0" OD × 0.25" LONG # 98-157 NYLON #94-116 Serrated Nut 94-6033 ) use the one from 6013-3 Installation Guide | REV. A2 | Page 3 For technical support, contact us at 1-800-565-5321...
- Page 4 Cordless Impact q 1/2" Socket HARDWARE USED 12× hand tiGhten the bolts #90-208 Hex Bolt 5/16" × 1" #98-116 Flat Washer #94-116 Serrated Nut 6013-3 Installation Guide | REV. A2 | Page 4 For technical support, contact us at 1-800-565-5321...
- Page 5 HARDWARE USED 4× hand tiGhten the bolts #90-204 Hex Bolt 5/16" × 3/4" #98-116 Flat Washer #94-116 Serrated Nut 6013-3 Installation Guide | REV. A2 | Page 5 For technical support, contact us at 1-800-565-5321...
- Page 6 1/2" Drill Bit w/ Drill Collar ( Set at 1/2" ) q Plus Nut Tool ( 5/16" ) HARDWARE USED 8× #94-132 Plus Nut DRILL COLLAR 1/2" ) set at 6013-3 Installation Guide | REV. A2 | Page 6 For technical support, contact us at 1-800-565-5321...
- Page 7 1/2" socket until the plusnut locks, then remove the bolt by turning the impact in reverse. FORWARD REVERSE 6013-3 Installation Guide | REV. A2 | Page 7 For technical support, contact us at 1-800-565-5321...
- Page 8 2.1.3 Put the assembled bottle holder back in place aligning the holes to the plusnuts, then install the bottle holder to the plus nuts. most vehicle use spacer when not over ribs W/ Spacer W/O Spacer 6013-3 Installation Guide | REV. A2 | Page 8 For technical support, contact us at 1-800-565-5321...
- Page 9 4× #90-212 Hex Bolt 5/16" × 1-1/4" #98-116 Flat Washer #98-157 Spacers ( 2× ) #94-116 Serrated Nut 94-6033 ) use the one from 6013-3 Installation Guide | REV. A2 | Page 9 For technical support, contact us at 1-800-565-5321...
- Page 10 4× #90-212 Hex Bolt 5/16" × 1-1/4" #98-116 Flat Washer #98-157 Spacers ( 2× ) #94-116 Serrated Nut 94-6033 ) use the one from 6013-3 Installation Guide | REV. A2 | Page 10 For technical support, contact us at 1-800-565-5321...
- Page 11 PHASE 2 – INSTALL 2.4 BOTTLE HOLDER INSTALLATION FACING IN THE CAB 2.4.1 After installation is complete attach the strap on the bottle holder as shown. 6013-3 Installation Guide | REV. A2 | Page 11 For technical support, contact us at 1-800-565-5321...
- Page 12 “You have successfully installed your Steel Bottle Holder Thank you for doing business with us. ” cs@rangerdesign.com For any feedback or suggestions you may have, please contact: 6013-3 Installation Guide | REV. A2 | Page 12 For technical support, contact us at 1-800-565-5321...
Need help?
Do you have a question about the 6013-3 and is the answer not in the manual?
Questions and answers