ENGLISH WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN “CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
The speaker’s impedance is 8 ohms. Make sure that the connected receiver is equipped with 8-ohms output speaker terminals such as AIWA AV-NW50/51 and AV-NW30/31. Speaker’s L/R Either of the two front and rear speakers can be connected to R (right) or L (left) terminals.
For further information, refer to the instructions of the mounting kit. AIWA disclaims any responsibility for injury to persons or other accidents caused by not fitting the speakers properly or if the place of the installation is not suitable.
CONNECTION Sub woofer Surround speakers Before connecting the speakers, turn off the power of your stereo receiver and the sub woofer. Refer to the operating instructions of the receiver as well. [ASUB WOOFER] Connect the INPUT jack on the sub woofer and the SUB WOOFER output jack on the receiver with the supplied connecting cord.
OPERATING SUB WOOFER POWER POWER: Turns the power on and off. VOLUME: Adjusts the volume of the sub woofer. - The volume level should be balanced with that of all other channels. - If the sound is distorted, turn VOLUME down on the sub woofer or lower the sub woofer level on the receiver.
Need help?
Do you have a question about the SX-AVR30 and is the answer not in the manual?
Questions and answers