Related Manuals for Petwant PWS 110
Summary of Contents for Petwant PWS 110
- Page 2 Petwant PWS 110 Keep the water level high. Top up the water frequently When the fountain runs dry, the pump burns out. Clean your fountain every 2 or 4 Clean the pump and weeks with soap. After cleaning, the fountain make sure that there is no soap stuck to the fountain.
- Page 4 Setting the fountain Wash the filter thoroughly with water before Install the filters and pump...
- Page 5 Install the fountain cover...
- Page 6 Add water and then plug in...
- Page 7 Clean the pump and fountain every two weeks. Remove the pump cover and rotor. Use a brush to clean the parts with water. Notice 1. Please remember to turn off and disconnect the power for safety reasons when the device is not in use. used. 2.
- Page 8 The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www.elektro- obojky.cz Changes to technical parameters, properties and printing errors reserved. Service center and distribution Reedog, sro Sedmidomky 459/8 101 00 Prague 10...
Need help?
Do you have a question about the PWS 110 and is the answer not in the manual?
Questions and answers