Page 1
Pet Water Fountain Please read the manual carefully before using this product.
Page 2
Components Handle Spout Tube Active Carbon lon Exchange Resin Medical Stone Filter Water Dispensing Tube Pump Filter sponge Bowl Mini Tips: Max water level: Keep the water level is about 1cm below the USB port Mini water level: Keep the water exceed the surface of the water pump...
Page 3
Assemble Pump ① Place the pump inside square indention of the product. ② Pass the pump USB cable through the water slot. ③ Place the pump USB cable into the groove. Assemble Filter Clean the filter with clean water before use to remove dust attached to the surface.
Page 4
Assemble Water Fountain and Power ON Install the water fountain Connect the power adaptor Fountain Maintenance ● Power off before cleaning the product. ● Clean fountain with water or clean the product. ● Foam filter can only clean by water,detergent is not allowed. ●...
Pump Maintenance Filter sponge Pump ① Remove the filter sponge. ② Remove the pumpcover. ③ Remove the stator cover. ④ Remove the stator and clean the parts by water stator Stator Stator Cover Pumpcover Parameters Product Name Pet Water Fountain Product Model Dimension 228mm*228mm*124mm...
Safety & Warnings Read all instructions carefully before attempting to operate this device. ●This fountain is only intended for indoor use with dogs and cats. ●Place the power adapter in a high position, away from the fountain so it does not get wet. ●Only use a DC/5V power adapter with this fountain.
Page 7
The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www.electric-collars.com. Changes to technical parameters, properties and printing errors reserved. Service center and distribution Reedog, sro Sedmidomky 459/8 101 00 Prague 10...
Need help?
Do you have a question about the W8 and is the answer not in the manual?
Questions and answers