Advertisement
Using the TPE-112GS with a non-PoE device
Note: Take note of the output power for your non-PoE device. The TPE-112GS
only supports non-PoE devices with an output power of 5V, 7.5V, 9V or 12V.
1. Select the proper voltage (5V, 7.5V,
9V or 12V).
2. Connect an Ethernet cable from a
PoE switch to the PoE In port on
the TPE-112GS.
3. Connect the built-in Ethernet cable
on the TPE-112GS to the non-PoE
device's LAN port
(e.g. TEW-633GR).
4. Connect the provided Jumper
cable to a non-PoE device (e.g.
TEW-633GR) and to the
TPE-112GS.
Your installation is now complete.
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
Register Your Product
www.trendnet.com/register
Thank you for choosing TRENDnet
5
English
Advertisement
