TRENDnet TFC-110S15 - QUICK Quick Installation Manual page 3

2. Connect the fiber cable to the fiber converters.
3. Connect the power adapter to the back of the fiber converter.
Note:
1. For the TFC-110MM/MST/MSC/110S15/S15i/S30/S30i/S60/S60i/S100,
the TX and RX cables must be reversed on the opposite fiber connection.
2. TFC-15MS100 converts Multi-Mode to Single-Mode fiber, it can be connected
to a switch with Multi-Mode SC-type fiber connection (e.g TEG-424WS with
fiber modules) to extend the distance up to 15km with Single-Mode fiber.
3. Cabling
a. Multi-Mode Optic Cable: TFC-110MSC, TFC-110MST, TFC-110MM.
b. Single-Mode Optic Cable: TFC-110S15, TFC-110S30, TFC-110S60,
TFC-110S100, TFC-110S15i, TFC-110S30i, TFC-110S60i.
c. Single Strand Optic Cable for TFC-110S20D3, TFC-110S20D5,
TFC-110S40D3, TFC-110S40D5.
2