Download
Share
Print this page
  1. Manuals
  2. Brands
  3. PLANEPRINT Manuals
  4. Aircrafts
  5. Halo
  6. Assembling manual

PLANEPRINT Halo Assembling Manual

Motor upgrade kit
Hide thumbs Also See for Halo:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Motor upgrade kit
www.planeprint.com
the ONLY place where you can get
original Planeprint STL fi les legally!

Advertisement

loading
Need help?

Need help?

Do you have a question about the Halo and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PLANEPRINT Halo

Summary of Contents for PLANEPRINT Halo

  • Page 1 Motor upgrade kit www.planeprint.com the ONLY place where you can get original Planeprint STL fi les legally!
  • Page 2 This manual is constantly being improved and supplemented, we recommend downloading the latest version from our website before building. To print all PLANEPRINT models you need to set some basic profi les in Cura (If you use another slicer, please set the same parameters).

  • Page 3: Additional Settings

    Please note the additional settings for the individual parts! P1_Battery strip_halo.stl MATERIAL PLA, Weight: ~ 1 g ADDITIONAL SETTINGS none required P1_Motornose 31_halo.stl P1_Motornose 32_halo P1_Motornose motor inside_halo MATERIAL PLA, Weight: ~ 19 g ADDITIONAL SETTINGS • use brim HALO PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 4 P1_Spinner folding prop 5mm_halo.stl MATERIAL PLA, Weight: ~ 2 g ADDITIONAL SETTINGS none required There are different versions, it is best to print them all and try out which one fi ts your motor best. HALO PRINTING & ASSEMBLING MANUAL © PLANEPRINT...

  • Page 5: Motor Assembly

    P1_Spinner folding prop 5mm_halo.stl A spinner with Ø25mm fi ts this version. Drill holes here to suit your motor. If necessary, secure the motor nose with a piece of tape. P1_Motornose motor inside_halo.stl HALO PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 6 P1_Battery strip_halo.stl The motor is already mounted at the correct angle, so no electronic correction of the elevator is necessary. When climbing, make sure that the halo does not slow down too much. HALO PRINTING & ASSEMBLING MANUAL © PLANEPRINT...
  • Page 7 3D printing Always keep the transmitter switched on when the model will not be replaced by PLANEPRINT.com in any way. is switched on. When operating, always keep a safe distance from your Always remove the battery before disassembling the model.