Specifications - TRENDnet TEW-650AP User Manual

Specifications
Hardware
Standards
Interface
LED Indicators
Buttons
Power Supply
Dimensions
(LxWxH)
Weight
Temperature
Humidity
Wireless
Modulation
WDS
Repeater Mode
Antenna
Frequency
Media Access Protocol
Data Rate (Auto Fallback)
Output Power
Receiving Sensitivity
Encryption
Channels
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and
coverage will vary depending on interference, network traffic, building materials and other conditions.
IEEE 802.11n draft 2.0, IEEE 802.11b, IEEE 802.11g, and 802.11e
1 x 10/100Mbps Auto‐MDIX LAN port
Power, LAN, WPS, and Wireless
Reset button – restores factory default settings
WPS button‐ enables WPS function
12 V DC 0.5A external power adapter
119 x 25 x 85 mm (4.6 x 1.0 x 3.3 in.)
113.4 g (4 oz)
Operating: 0° ~ 40°C (32° ~ 104°F), Storage: ‐20°C ~ 60°C (‐4° ~ 140° F)
Max. 90% non‐condensing
802.11n: BPSK, QPSK, 16QAM, 64QAM with OFDM
802.11g: OFDM with BPSK, QPSK and 16/64‐QAM sub‐Carrier
802.11b: CCK (11 and 5.5Mbps), DQPSK (2Mbps), DBPSK (1Mbps)
modulations
Enable/disable Wireless Distribution System support
Enable/disable AP Mode Support
1 x 2dBi detachable antenna
2.412 ‐ 2.462 GHz (North America)
2.412 ‐ 2.472 GHz (Europe)
IEEE 802.11
802.11n: up to 150Mbps
802.11g: up to 54Mbps
802.11b: up to 11Mbps
802.11n: 11dBm (typical) @ 150Mbps
802.11g: 15dBm (typical) @ 54Mbps
802.11b: 18dBm (typical) @ 11Mbps
802.11n: ‐68dBm (typical) @ 150Mbps
802.11g: ‐72dBm (typical) @ 54Mbps
802.11b: ‐84dBm (typical) @ 11Mpbs
64/128‐bit WEP (HEX & ASCII), WPA/WPA2 RADIUS (AP mode only),
WPA/WPA2‐PSK
1‐11 (FCC), 1‐13 (ETSI)
Page 58