TRENDnet TEW-650AP Quick Installation Manual page 7

14. Select the desired Wireless Mode and then
click Next.
15. Select a Security Mode and then click Next
(example shows WPA-PSK).
Note: To protect your network from any unauthorized access it is recommended to
enable security.
16. Select the desired WPA mode, enter
characters for your Pre-Shared key and then
click Next. For WPA-PSK or WPA2-PSK, the
Pre-Shared Key must be between 8 and 63
ASCII or 64 HEX characters. Make sure to
copy down the Pre-Shared Key.
17. Click Save (optional). This saves your
configuration settings, which can be reloaded
when needed.
5