Twyford SF1249CP Installation Instructions & Maintenance Manual

Your product has a high quality finish and should be treated with care to
preserve the visible surfaces.
Never use abrasives or abrasive cleaning agents to clean this product. Clean
regularly with contamination free warm soapy water and a damp soft cloth. Do
not use products containing chlorine bleach or hydrochloric acid as these can
damage the product. Always rinse the product thoroughly after cleaning to
remove cleaning products that can damage the product finish.
Your product comes with a 2 year guarantee, This includes 2 years parts and
labour followed by a further 3 years parts only, subject to the following:
Proof of purchase will be required
The guarantee does not cover faults or damage caused by incorrect installation
and/or maintenance, ordinary wear and tear, water composition etc. including:
Supply pipes reversed, Incorrect pressure or temperature, *Incorrect use,
Foreign bodies and/or scale due to the water composition, Incorrect cleaning.
We have a policy of continuous improvement and reserve the right to change
specifications without notice
Twyford Bathrooms Registered Office
Geberit House
Edgehill Drive
Warwick
Warwickshire
CV34 6NH
Part of the Geberit Group
UK Technical Helpline
Telephone: 01926 516800
Email: technical@geberit.com
P8
Website: www.twyfordbathrooms.com
INST-SF1249CP-V1
Wall Mounted Infra-Red Spout, Round
SF1249CP
Installation Instructions & Maintenance Guide
Technical Specifications:
Supply:
Suitable For High Pressure Systems
Working Pressure:
0.5 bar - 5.0bar
Operating Temperature:
Hot: Max 45°C
Cold: Min 5°C
Inlet Connections:
1/2" BSP
Cartridge/Valve Type:
Electro Valve
IMPORTANT: Please read all of the
instructions before installation.