TRENDnet TEW-411BRP Quick Installation Manual page 2

General Wireless AP System Connection
The general function of Wireless AP Router is defined as an "AP + Router",
and the connection is as following diagram.
Plug in the power supply. The power LED will turn on to indicate power
operation.
User may connect the WAN port to Cable / DSL modem. The WAN LED
will indicate the connection.
Connect the LAN ports to computers that need to link to Intranet (your
network) or Internet. On the AP Router, it provides 4 LAN ports. If more
computers need to join the network, you can connect an Ethernet Switch
to the Router's LAN port to expand the network capacity.
The Wireless Interface can easily manage 30 wireless clients and
workstations simultaneously.
AP Router's Default Settings
User Name
Password
IP Address
Subnet Mask
ESSID
Channel
Mode
Encryption
DHCP Server
(no user name)
admin
192.168.1.1
255.255.255.0
wlan-g
6
11b+g
Disabled
Enabled
1