Aveo Systems QSC Q-Sys Core products Integration Manual

S Y S T E M S
Integrating a QSC Q‑Sys Core product with Mira Connect™
QSC Q‑Sys Core products can be controlled with Mira Connect™, Aveo Systems'® smart control appliance.
This integration guide provides detailed steps for configuring Mira Connect (using
product.
Mira Connect communicates and controls the QSC Q‑Sys Core product over an Ethernet network using 'named components' or
'named controls' defined in Q‑SYS Core product configuration file. The telephony status and control block must be a 'named
component' in the Q‑Sys designer software.
Figure 1: The Mira Connect AV control system controls thousands of devices, including QSC Q‑Sys Core products.
Integration Steps
To integrate a QSC Q‑Sys Core product with Mira Connect, follow these steps as detailed in the following sections:
1. Configure the QSC Q‑Sys Core product
2. Add a room to Mira Portal
3. Pair Mira Connect to the room
4. Add the QSC Q‑Sys Core product
5. Enter the Control Points
6. Add other Equipment to Room
Step 1. Configure the QSC Q‑Sys Core product
To integrate a QSC Q‑Sys Core product with Mira Connect, first create or upload a design file to QSC Q‑Sys Core product using
the Q‑Sys designer software. See the QSC Q‑Sys Core product documentation for more information.
Important: Newer versions of the Q‑Sys designer software have replaced 'named components' with the Code Name and
require Script Access to be set to 'All' for the block to be managed by Mira Connect. Ensure all the blocks you'd like to
have detected by Mira Connect have their script access set to 'All'.
Aveo Systems, Inc. • Marietta, GA • USA • Phone: +1.678.653.7090
Email: sales@aveosystems.com • aveosystems.com
QSC Q‑Sys Core product
Mira Portal) to control the QSC Q‑Sys Core
1
Copyright © Aveo Systems, Inc. All rights reserved.
Mira Connect Integration Guide for