Using Your Tv Display With A Universal Or Learning Remote Control - Dell W1900 Owner's Manual

20
21
22
23
24
25
26
Using Your TV Display With a Universal or Learning
Remote Control
Preprogrammed universal remote controls can be programmed to control the following
functions on your Dell TV display:
• Power
• Channel Up (+)
• Channel Down (-)
• Volume Up (+)
• Volume Down (-)
• Mute
• Input Select
NOTE: Future preprogrammed universal remote controls may be able to control
more functions.
You can program universal remote controls to work with your Dell TV display in the following ways:
• If the remote control manual lists codes by manufacturer, use the Philips codes.
• If the remote control has a search function, this function may be used to find the
correct code.
• If the remote control has a learning function, you can program specific buttons on it from
the Dell remote control, in addition to those buttons listed above.
NOTE:
For additional information, see the documentation that came with your universal or learning
remote control.
22
Your Remote Control
POP PBP Enters and exits POP or PBP mode
Audio Cycles through the preset Audio options
Vol + Increases the volume
In the OSD, use the volume button to navigate through
the menus.
Vol - Decreases the volume
In the OSD, use the volume button to navigate through
the menus.
Menu Enters and exits the OSD main menu
Disp Displays information about your TV (for example, in TV
Mode displays the channel you are watching)
Input Enters and exits the Input Select menu