Advertisement
Quick Links
AURATON Taurus
User manual ver. 20200830
The document presents collected information on safety, assembly and use of AURATON Taurus.
Wired control strip for underfloor heating
AURATON Taurus is an 8-zone, wired strip designed to work with wired temperature thermostats,
actuators, a central heating pump, and a heating device.
Q
WARNING!
All connections should be made when power source is disconnected.
P
AURATON Taurus is designed for mounting on a DIN-rail in the installation cabinets.
Operation
AURATON Taurus works in the same way as 8 separate heating zone channels and additionally may
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AURATON Taurus
Summary of Contents for AURATON Taurus
- Page 1 All connections should be made when power source is disconnected. AURATON Taurus is designed for mounting on a DIN-rail in the installation cabinets. Operation AURATON Taurus works in the same way as 8 separate heating zone channels and additionally may...
- Page 2 perform the following functions: Control of a central heating circulation pump, Control of a central heating furnace via a transmitter with potential-free contacts. Description of the device, the push buttons and the indicator lights A diode indicating the status of the power supply A diode indicating the status of operation of the pump or the central heating furnace Terminals of wired thermostats 1-8...
-
Page 3: Din Rail Mounting
Diodes indicating operation of zones 1-8 DIN rail mounting DIN rail. Hook the AURATON Taurus onto the DIN rail with the upper hooks. Pull the lower hook down with a “flat” screwdriver. Put AURATON Taurus in the right place. Release the lower hook. - Page 4 ATTENTION: For easy installation, the terminals are equipped with removable clamps. Before cable connections are made, they can be disconnected from AURATON Taurus.
- Page 5 One wired AURATON thermostat can be connected independently to each zone. Indication of operation of AURATON Taurus AURATON Taurus indicates its operating status with LED diodes. A diode indicating the status of the power supply (red):...
- Page 6 The central-heating pump and the furnace are switched off when none of the heating zones is active – the diode indicating operation of the centralheating pump will be turned off. To improve the operation of the heating system, AURATON Taurus is equipped with a delay system for switching on the central heating pump and the furnace.
- Page 7 The central heating furnace must be connected to the COM-NO or COM-NC clamps. This is a standard one-pole bistate transmitter. In most cases, the NC clamp is not used. WARNING: All connections should be made when power source is disconnected. It is recommended to entrust the installation of AURATON Taurus to professionals.
- Page 8 Actuators Central heating pump Heating device e.g. gas boiler Connecting multiple actuators to one thermostat...
- Page 9 Actuators (max 3 per 1 line) Central heating pump Heating device e.g. gas boiler Connecting two AURATON Taurus devices (common pump and furnace)
- Page 10 Actuators Central heating pump Heating device e.g. gas boiler ATTAENTION: The furnace and pump switch on times add up.
-
Page 11: Cleaning And Maintenance
Max. 250 V AC, max. 2 A (potential-free contacts Relay load capacity: COM, NO, NC) Load capacity of control outputs for heads 230 V: Max. 30 W, up to 3 AURATON actuators per zone Load capacity of 230 V central heating pum Max. 200 W output: Delay in activation of the relay and pump: Approx. - Page 12 The user is responsible for delivering the devices to a reception point for used-up electric and electronic equipment. Contact and address of the manufacturer: LARS, ul. Świerkowa 14 64-320 Niepruszewo, POLAND www.auraton.pl Download User manual Declaration of conformity...
Need help?
Do you have a question about the Taurus and is the answer not in the manual?
Questions and answers