Advertisement
Quick Links
Advertisement
Related Manuals for ITC T-522UH
Summary of Contents for ITC T-522UH
- Page 1 UHF Dual-Channel Wireless Microphone System T-522UH/522UV T-522UT/522US T-522UL/522UW User Manual...
- Page 2 Thank you for purchasing UHF dual channel wireless microphone system. The unit is a dual-channel wireless receiver. Each channel with same 200 frequencies . It is designed for corporate events, live music performances, higher education To get your system up and running in just a few minutes, follow the simple instructions in this manual.
- Page 3 an IR sync to automatically program transmitters View Of Back Panel ⑦Power Jack: 12V DC/ 1 A ⑧Antenna BNC ⑨Unbalanced Audio Output Jack Size: W420*H44*D148 mm Be to be mounted in a standard audio equipment rack with factory offers mounting brackets Operation Receiver Make sure that the transmitter is powered off before turning the receiver power on.
- Page 4 The LCD Display ①RF bar indicators: 8-bar indicates the strength of radio frequency signal. ②AF bar indicators: 8-bar indicates the strength of audio signal ③When the LCD shows FREQU, it is the current working frequency ④Mute sign shows that no RF signal A.
- Page 5 B. Scan Frequency The receiver scans the RF spectrum for the best available frequency Press SET button to star the scan When the scan is complete, the selected channel will appear on the display. C. Manual Frequency ▼ When press “▲”“ ”...
- Page 6 (The LCD will display one of the above depends on last status) D. How To Set MUTE Of Receiver Press “SET’’ button to access SQELCH menu Press “SET” button and hold seconds, LCD will display ▼ Squelch like 15 dB indicates sensitivity status. Press “▲”“ ”...
- Page 7 E. System Lock Operation Control lock options is available for receiver to protect against accidental or unauthorized changes. Locks can be directly set from the menu as follows Press “SET” button for 2-3 seconds, LCD will appear on the display as follows After 2-3 seconds, LCD will change to one of the following diagrams.
- Page 8 If it is in LOCK ON mode, press “SET” button and hold then ▼ press “▲”“ ” button to set to LOC OFF. Handheld Transmitter Controls, Features & Indicators ①Metal Grille Hexagonal-shaped to protect the microphone cartridge from being damaged, reducing breath sounds and wind noise.
- Page 9 IR Sync For Automatic Handheld Transmitter Set Up Turn on the handheld transmitter Press the SET sync button on receiver . the IR LCD indicating the sync mode is active Align the IR sync windows of the handheld transmitter and receiver at a distance of less 20 CM.
- Page 10 Body-Pack Transmitter Controls, Features & Indicators ①Audio Balanced Input Jack ②Power Button ③ Antenna ④Display ;Channel and battery level. ⑤IR Align Window: Align with the receiver IR window during an IR sync to automatically program transmitters. ⑥RF Power Setting Lo or Hi ⑦Microphone Gain Control ⑧Battery Compartment：Recommend Ni-MH AA batteries×2 or AAX2 rechargeable batteries...
- Page 11 Specifications Of System Frequency Range: UHF range 590-640MHz Modulation Mode: PLL Bandwidth: 25MHz Channel: 200 Channel interval 25 KHz Stability: +/-0.0005% Dynamic Range: 100dB Max Deviation: +/-80 KHz Frequency Response: 20Hz-20 KHz+/-3dB S/N: >85dB Distortion: <0.5% Operation temperature -10℃~ 60℃ T.H.D: <0.5% (at 10KHz Deviation) Power Supply: DC 12V~500MA Audio output: Balanced &...
- Page 12 UHF Dual-Channel Wireless Microphone System...
Need help?
Do you have a question about the T-522UH and is the answer not in the manual?
Questions and answers