D-Link DWL-122 Manual page 14

Using the Configuration Utility
D-Link Air DWL-122 uses the Configuration Utility as the management
software. The utility provides the user an easy interface to change any settings
related to the wireless adapter. After you have completed the installation
of the DWL-122 (refer to the Quick Installation Guide that came with your
purchase) whenever you start the computer, the Configuration Utility starts
automatically and the system tray icon is loaded in the toolbar (see illustration
below.*) Clicking on the utility icon will start the Configuration Utility. Another
way to start the Configuration Utility is to click on Start>Programs>D-Link
Air >D-Link Air Utility.
If you are using Windows XP, you can use either the Zero Configuration Utility
or the D-Link Configuration Utility.
To use the D-Link Configuration Utility with XP, right-click
on the wireless network icon in the taskbar in the lower
right-hand corner of your computer screen.
In the window that appears, select
View Available Wireless Networks
and click the Advanced button. The
screen at right will appear.
Select the Wireless Networks tab.
Uncheck the box in the properties window
that enables windows configuration.
After you have done this, you can then use the D-Link
Configuration Utility with XP by clicking on the D-Link
Configuration Utility icon.
If the icon does not display in the taskbar, then click on
this icon on your desktop to open.
*Configuration Utility icon in
the system tray
14