D-Link DWL-122 Manual page 12

Getting Started (continued)
Setting up a Wireless Infrastructure Network
For a typical
wireless setup
at home (as
shown here),
please do the
following:
6
You will need broadband Internet access (a Cable or DSL-subscriber
line into your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router. (See the
Quick Installation Guide included with your router.)
Install the D-Link Air DWL-122 wireless USB adapter into an available
USB port on your desktop computer. (See the Quick Installation Guide
included with the DWL-122.)
If you are connecting a laptop computer to your network, you can install
the DWL-122 into an available USB port on your laptop. (See the Quick
Installation Guide included with the DWL-122.)
A RADIUS server is optional. Connect a RADIUS server to your network
to use all the features of WPA. (Without a RADIUS server you can still
use the WPA Pre-Shared Key mode.) RADIUS Authentication can also
be provided by another service provider over the Internet and remote to
your network site.
2
3
4
1
5
12