Hide thumbs Also See for Marquis Series:
Table of Contents

Advertisement

Quick Links

CAUTION! Risk of Fire! DO NOT VWRUH LQVWUXFWLRQ PDQXDOV LQVLGH ¿UHSODFH FDYLW\
+LJK WHPSHUDWXUHV FRXOG FDXVH D ¿UH
INSTALLER: Leave this manual with the appliance, not inside the appliance.
CONSUMER: Retain this manual for future reference. Do not store inside the appliance.
NOTICE: DO NOT discard this manual!
MARQUIS
SERIES
Models:
MARQ36IN-B, MARQ42IN-B
This appliance may be installed as an OEM
installation in manufactured home (USA
only) or mobile home and must be installed
in accordance with the manufacturer's
instructions and the Manufactured Home
Construction and Safety Standard, Title 24
CFR, Part 3280 in the United States, or the
Standard for Installation in Mobile Homes,
CAN/CSA Z240 MH Series, in Canada.
This appliance is only for use with the type(s)
of gas indicated on the rating plate. This
appliance is not convertible for use with other
JDVHV XQOHVV D FHUWL¿HG NLW LV XVHG
Pour demander un exemplaire en français de ce manuel
d'installation, visitez www.majesticproducts.com.
Installation Manual
Installation and Appliance Setup
Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
• DO NOT VWRUH RU XVH JDVROLQH RU RWKHU ÀDP-
mable vapors and liquids in the vicinity of this
or any other appliance.
• What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Leave the building immediately.
- Immediately call your gas supplier from
a neighbor's phone. Follow the gas sup-
plier's instructions.
- If you cannot reach your gas supplier, call
WKH ¿UH GHSDUWPHQW
• Installation and service must be performed
E\ D TXDOL¿HG LQVWDOOHU VHUYLFH DJHQF\ RU WKH
gas supplier.
DANGER
DO NOT TOUCH GLASS
NEVER ALLOW CHILDREN
$ EDUULHU GHVLJQHG WR UHGXFH WKH ULVN RI
burns from the hot viewing glass is provided
with this appliance and must be installed for
WKH SURWHFWLRQ RI FKLOGUHQ DQG RWKHU DWULVN
individuals.
Decorative barrier front provided with this appliance.
HOT GLASS WILL
CAUSE BURNS.
UNTIL COOLED.
TO TOUCH GLASS.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Marquis Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Majestic Marquis Series

  • Page 1 WKH SURWHFWLRQ RI FKLOGUHQ DQG RWKHU DWULVN JDVHV XQOHVV D FHUWL¿HG NLW LV XVHG individuals. Pour demander un exemplaire en français de ce manuel d’installation, visitez www.majesticproducts.com. Decorative barrier front provided with this appliance. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 2: Table Of Contents

    B. Securing and Leveling the Appliance ....32 C. Installing Non-Combustible Facing Material ..33 Î = Contains updated information. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 3: Installation Standard Work Checklist

    Comments: Further description of the issues, who is responsible (Installer/ Builder/ Other Trades, etc) and corrective action needed ____________________________________________________________________________________ Comments Communicated to party responsible ____________________ by ______________________on ___________ (Builder / Gen. Contractor/) (Installer) (Date) Î = Contains updated information. 2614-982B 11/21 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 4: 3Urgxfw 6Shfl¿F Dqg ,Psruwdqw 6Dihw\ ,Qirupdwlrq

    NQRZQ WR WKH 6WDWH RI &DOLIRUQLD WR FDXVH FDQFHU DQG reproductive harm. For more information go to: www. P65Warnings.ca.gov. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 5: Requirements For The Commonwealth Of Massachusetts

    VENT DIRECTLY BELOW. KEEP CLEAR OF ALL OB- of the installation. STRUCTIONS”. See Gas Connection section for additional Common- wealth of Massachusetts requirements. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 6: Getting Started

    Wrenches Reciprocating saw 1/4 in. nut driver 1RQFRUURVLYH OHDN FKHFN VROXWLRQ 1/2 - 3/4 in. length, #6 or #8 Self-drilling screws &DXONLQJ PDWHULDO  ž) PLQLPXP FRQWLQXRXV H[SRVXUH rating) Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 7: Inspect Appliance And Components

    DO NOT XVH WKLV DSSOLDQFH LI DQ\ SDUW KDV EHHQ XQGHU ZDWHU &DOO D TXDOL¿HG VHUYLFH WHFKQLFLDQ WR LQVSHFW WKH DSSOLDQFH DQG WR UHSODFH DQ\ SDUW RI WKH FRQWURO V\VWHP DQGRU JDV FRQWURO ZKLFK KDV EHHQ XQGHU ZDWHU Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 8: Framing And Clearances

    Millimeters 1549 59-1/4 1505 35-7/8 39-7/8 1013 29-5/8 31-1/16 3-7/8 57-5/8 1464 2-3/4 35-3/16 10-7/8 34-3/16 16-1/8 54-15/16 1395 41-3/8 1051 16-7/8 25-5/8 23-1/2 Figure 3.1 Appliance Dimensions (MARQ36IN-B) Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 9 1659 1702 41-7/8 1064 32-11/16 45-7/8 1165 36-1/16 3-7/8 2-3/4 62-5/8 1591 40-3/16 1021 10-7/8 16-1/8 39-3/16 59-15/16 1522 16-7/8 46-3/8 1178 30-5/8 23-1/2 Figure 3.2 Appliance Dimensions (MARQ42IN-B) Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 10 (33 mm) MARQ42IN-B FSMQ42 40-9/16 IN. (1030 mm) 41-13/16 IN. (1062 mm) 46-11/16 IN. (1186 mm) 3-9/16 IN. 1-1/4 IN. (91 mm) (32 mm) Figure 3.3 Decorative Barrier Front Dimensions Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 11: Clearances To Combustibles

    1/2 inch wall sheathing has not been installed. Inches 75-5/16 59-1/2 106-1/2 26-3/8 29-3/4 MARQ36IN-B Millimeters 1913 1511 2705 Inches 79-5/8 65-9/16 112-9/16 28-1/2 32-13/16 MARQ42IN-B Millimeters 1921 1665 2859 Figure 3.4 Appliance Locations Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 12 2 X 4 ONLY IN GRAY AREA NOTE: 2 X 4 HEADER CONFIGURATION 39 IN. 1 IN. FACTORY-SUPPLIED 1/2 IN. NON-COMBUSTIBLE BOARD 1/2 IN. = COMBUSTIBLES NOT ALLOWED Figure 3.5 Non-Combustible Zone Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 13: Constructing The Appliance Chase

    1549 1665 1321 $GMXVW IUDPLQJ GLPHQVLRQV IRU LQWHULRU VKHDWKLQJ VXFK DV VKHHWURFN )RU LQVWDOODWLRQV ZLWK YLQ\O ÀRRULQJ VHH 6HFWLRQ ( Figure 3.6 Clearances to Combustibles (2 X 4 Construction) Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 14 ** 2 x 4 material must be framed down from 2 x 6 rough opening height B’ to rough opening height B. )RU LQVWDOODWLRQV ZLWK YLQ\O ÀRRULQJ VHH 6HFWLRQ ( Figure 3.7 Clearances to Combustibles (2 x 6 Construction) Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 15: Hearth Extension

    WOOD OR OTHER COMBUSTIBLE FLOOR OR PLATFORM Figure 3.8 Non-Combustible Hearth Extension Dimensions Figure 3.10 Appliance Raised a Minimum of 3 Inches Above Combustible Surface. Non-Combustible Hearth Ex- tension NOT REQUIRED. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 16: Floor Protection

    110 °F (based on ambient temperature of 70 °F). Consult the manufac- WXUHU¶V ÀRRULQJ VSHFL¿FDWLRQV WR HQVXUH FRPSDWLELOLW\ Figure 3.11 Vinyl Flooring Recommendations Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 17: Termination Location And Vent Information

    Over 20/12 to 21/12 ..........8.0 * H minimum may vary depending on regional snowfall. Refer to local codes. Figure 4.1 Minimum Height From Roof to Lowest Discharge Î Opening Figure 4.3 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 18: Vent Terminal Clearances

    24 in. (610 mm)* 24 in. (610 mm)* WZR VLGHV EHQHDWK WKH ÀRRU Vinyl or composite overhang 42 in. (1067 mm) 42 in. (1067 mm) Figure 4.4 Minimum Clearances for Termination Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 19: Use Of Elbows

    Figure 4.6 Vertical and Horizontal Offset for DVP Elbows DVP48 1219 DVP6A 3 to 6 76 to 152 2-1/8-4-1/4 54-108 DVP12A 3 to 12 76 to 305 2-1/8-8-1/2 54-216 Figure 4.5 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 20: Measuring Standards

    • Horizontal pipe installed level with no rise. MEASURE TO SHADED SURFACE (OUTSIDE MOUNTING SURFACE) Î Figure 4.7 Measure to Outside Mounting Surface Figure 4.8 Measure to Top of Last Section of Pipe Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 21: Vent Diagrams

    40 ft 12.2 m After V = 6 ft then H = 2 x V ft Maximum = 60 ft Maximum *when used with approved termination caps Î Figure 4.9 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 22: Two Elbows

    4.9 m 9 ft 2.7 m 18 ft 5.5 m 10 ft 3.0 m 20 ft 6.1 m = 60 ft Maximum = 20 ft Maximum Î Figure 4.10 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 23 Shaded area of chart is for MARQ42IN-B (Propane) must be adhered to. KDV QR VSHFL¿F UHVWULFWLRQV (;&(37 = 2 x V and V cannot exceed 60 ft Maximum t max total total Î Figure 4.11 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 24 See Figure 4.14. EXHAUST RESTRICTOR SET TO 2-2 3. Orientate and align the two pieces of the exhaust Figure 4.14 Exhaust Restrictor Installation restrictor as shown in Figure 4.14. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 25 Shaded area of chart is for MARQ42IN-B (Propane) 1R VSHFL¿F UHVWULFWLRQV RQ WKLV YDOXH (;&(37 = 50 ft (15.2 m) Max. After V = 6 ft, then H Max.= V Figure 4.15 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 26: Three Elbows

    KDV QR VSHFL¿F UHVWULFWLRQV (;&(37 after V = 6 ft, then H Max = 2 x V TOTAL = 50 ft (15.2 m) Max. TOTAL + TOTAL INSTALLED HORIZONTALLY Figure 4.16 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 27: Pvlp-Slp, Pvi-Slp-B And Pvv-Slp Information

    Follow instruc- to Appliance Minimum Maximum tions included with the PVV-SLP powervent. 2-15 ft. 1-1/2 in. 2-1/2 in. 16-39 ft. Closed 1-1/2 in. Greater than 40 Closed Table 4.2 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 28: Vent Clearances And Framing

    ¿UHVWRSV PXVW KDYH D KHDW VKLHOG UHIHU WR 6HFWLRQ 12.A.) attached to them. • See Section 7.E. for information for regarding the instal- lation of a horizontal termination cap. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 29: Ceiling Firestop/Floor Penetration Framing

    DFFRUGLQJ WR LQVWUXFWLRQV LQFOXGHG ZLWK NLW INSTALL ATTIC INSULATION SHIELDS BEFORE OR AFTER INSTALLATION OF VENT SYSTEM CEILING FIRESTOP CEILING FIRESTOP INSTALLED BELOW CEILING INSTALLED ABOVE CEILING Figure 5.4 Installing the Attic Shield Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 30: Installing The Optional Heat Management

    Reference the heat management instructions for installation. KNOCKOUT LOCATION LEFT AND RIGHT SIDES Figure 5.5 Knockout Cover Plate Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 31: Appliance Preparation

    SPLATTER GUARD SPLATTER GUARD HEADER HEAT SHIELDS HEADER HEAT SHIELDS TECO-SIL TECO-SIL (SHIPPED ON REAR SIDE OF APPLIANCE (SHIPPED ON REAR SIDE OF APPLIANCE Figure 6.1 Shipping Location of Components Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 32: Securing And Leveling The Appliance

    ‡ 6HFXUH WKH DSSOLDQFH WR WKH ÀRRU E\ LQVHUWLQJ WZR VFUHZV through the pilot holes at the bottom of the appliance. Figure 6.5. Heat Shields and Nailing Tabs in Installation Position Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 33: Installing Non-Combustible Facing Material

    • Use a wet or dry towel or soft brush to remove dust or dirt from facing material. ‡ 6HH 6HFWLRQ  IRU ¿QLVKLQJ PDWHULDOV JXLGHOLQHV Figure 6.7 Installing Non-Combustible Facing Material Figure 6.6 Shipping Location of Non-Combustible Board Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 34: Venting And Chimneys

    • Only outer pipes need to be sealed. All unit collar, pipe, VOLS VHFWLRQ HOERZ DQG FDS RXWHU ÀXHV VKDOO EH VHDOHG in this manner, unless otherwise stated. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 35: Assemble Slip Sections

    • Continue adding pipe as necessary following instructions in “Assembling Pipe Sections.” NOTICE: ,I VOLS VHFWLRQ LV WRR ORQJ WKH LQQHU DQG RXWHU ÀXHV RI WKH VOLS VHFWLRQ FDQ EH FXW WR WKH GHVLUHG OHQJWK Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 36: Secure The Vent Sections

    Figure 7.9 Rotate Seams for Disassembly FRQQHFWLRQ SRLQW WR DSSOLDQFH 120º Figure 7.10 Align and Disassemble Vent Sections Figure 7.7 Securing Vertical Pipe Sections 120º Figure 7.8 Securing Horizontal Pipe Sections Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 37: Vertical Termination Requirements

    ‡ 7LJKWHQ QXW DQG PDNH VXUH WKH FROODU LV WLJKW DJDLQVW WKH pipe section. • Seal around the top of the storm collar. See Figure 7.13. SEAL Figure 7.11 Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 38: Install Vertical Termination Cap

    • Rest the small leg on the extended heat shield on top of the pipe section to properly space it from the pipe section. Important Notice: Heat shields may not EH ¿HOG FRQVWUXFWHG Figure 7.13 Venting through the wall Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 39: Install Horizontal Termination Cap

    Figure 7.14 Venting Through the Wall UHVLVWDQFH WR ZLQGGULYHQ UDLQ SHQHWUDWLRQ D ÀDVKLQJ NLW DQG +5& FDSV DUH DYDLODEOH :KHQ SHQHWUDWLQJ D EULFN ZDOO D EULFN H[WHQVLRQ NLW LV DYDLODEOH IRU IUDPLQJ WKH EULFN Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 40: Electrical Information

    ACCESS THROUGH LEFT COLUMN ACCESS THROUGH FIREBOX (Prior to installation of non-combustible board) (After installation of non-combustible board) GASKET COVER Figure 8.1 Junction Box Access Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 41: Electrical Service And Repair

    FDXVH LPSURSHU DQG GDQJHURXV RSHUDWLRQ 9HULI\ SURSHU RSHUDWLRQ DIWHU VHUYLFLQJ WARNING! Risk of Shock! 5HSODFH GDPDJHG ZLUH ZLWK W\SH ž & UDWHG ZLUH :LUH PXVW KDYH KLJK WHPSHUDWXUH LQVXODWLRQ Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 42: Wiring Requirements

    6 PIN 26D0619 CONTROL RED/BLK RED/BLK HEAT-OUT-GAS SPLITTER 6V DC BATTERY PACK APPLIANCE ON/OFF CONTROL BLACK/RED REAR ACCENT LIGHTING (X 2) Figure 8.3 IFT Wiring Diagram without Power Vent Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 43 6 PIN 26D0619 CONTROL RED/ RED/ HEAT-OUT-GAS ACCESSORY CABLE POWER VENT (OPTIONAL) (PVI-SLP-B SHOWN) JUMPER WIRE BLACK/RED REAR ACCENT LIGHTING (X 2) Figure 8.4 IFT Wiring Diagram with Power Vent Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 44: Gas Information

    DQG ÀH[LEOH JDV FRQQHFWRU DUH FRQQHFWHG WR WKH  LQ  &KHFN ZLWK \RXU ORFDO JDV XWLOLW\ WR GHWHUPLQH SURSHU mm) control valve inlet. RUL¿FH VL]H • If substituting for these components, please consult local codes for compliance. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 45: Air Shutter Setting

    QDWXUDO JDV ÀDPH 7KLV LV GXH WR WKH GLIIHUHQW FKHPLFDO FRPSRVLWLRQV WKDW PDNH XS ERWK IXHO W\SHV ,Q JHQHUDO WKH 3URSDQH ÀDPHV PD\ EH D OLWWOH VKRUWHU DQG PXFK EULJKWHU WKDQ D QDWXUDO JDV ÀDPH Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 46: Finishing

    EHFRPH ZDUP ZKLOH WKH DSSOLDQFH LV LQ RSHUDWLRQ (QVXUH finishing materials used for all surfaces (floor, walls, PDQWHOV HWF ZLOO ZLWKVWDQG WHPSHUDWXUHV XS WR °) ,I XVLQJ YLQ\O ÀRRULQJ UHIHU WR 6HFWLRQ ( Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 47: Finishing Templates

    TOP FINISHING screws. Follow the glass removal instructions in Section TEMPLATE SIDE FINISHING TEMPLATES Figure 10.4 Top and Side Finishing Template Locations 1-1/4 IN. Figure 10.2 Top Finishing Template Bend Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 48 Note: A thin layer of mortar may be applied over the YLVLEOH QRQFRPEXVWLEOH ERDUG EHWZHHQ ¿QLVKLQJ PDWHULDO DQG WKH ¿UHSODFH RSHQLQJ Figure 10.5 Finishing Template Bends Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 49: Mantel And Wall Projections

    10 IN. MAX. SEE SECTION 10.D FACTORY-SUPPLIED FOR REQUIRED NON-COMBUSTIBLE CLEARANCES BOARD 14 IN. MIN. COMBUSTIBLE OR FIREPLACE NON-COMBUSTIBLE OPENING WALL Figure 10.7 Non-Combustible Mantel Leg and Wall Projections Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 50 = 40-3/16 IN. (MARQ42IN-B) = 40-3/16 IN. (MARQ42IN-B) MARQ42IN-B 92-13/16 MARQ42IN-B FIREPLACE 1-1/4 IN. OPENING FIREPLACE OPENING Figure 10.11 Combustible Mantel Allowance - MARQ42IN-B Figure 10.12 Non-Combustible Mantel Allowance - MARQ42IN-B Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 51: Decorative Barrier Front Dimensions For Finishing

    NOTICE: 3URSHU FOHDUDQFHV IURP WKH ¿UHSODFH RSHQLQJ WR DQ\ ¿QLVKLQJ PDWHULDO WKLFNHU WKDQ  LQFK 0867 EH maintained. NOTE: Finishing templates are included with this product. See Section 10.B. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 52: Appliance Setup

    CAUTION! 5LVN RI ,QMXU\ DO NOT SXW ¿QJHUV XQGHU JODVV IUDPH )LQJHUV PD\ JHW SLQFKHG E\ JODVV IUDPH GXULQJ UHPRYDO Figure 11.1. Glass Clip Tool Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 53: Replacing Fixed Glass Assembly

    CAUTION! 5LVN RI ,QMXU\ DO NOT SXW ¿QJHUV XQGHU JODVV IUDPH )LQJHUV PD\ JHW SLQFKHG E\ JODVV IUDPH GXULQJ LQVWDOODWLRQ Figure 11.8. Securing Bottom Glass Clips Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 54: Remove The Shipping Materials

    Figure 11.10. Location of Glowing Embers in Shaded Areas refractory pieces. Figure 11.9. Apply Lava Rock Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 55: Teco-Sil Placement

    • Spread Teco-Sil evenly over bottom glass assembly. See Figure 11.11 • Turn ember lights on and fog Teco-Sil to desired coverage. See Figure 11.12. Figure 11.11. Teco-Sil Placement Figure 11.12. Teco-Sil Fogged Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 56: Log Set Assembly

    The numbers are listed in parentheses above. NOTE: Interior of MARQ36IN is shown in log installation pictures. Instructions apply to both the MARQ36IN and MARQ36IN-B. Figure 1. Log Set Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 57 Log #2 (SRV2270-703): Log #2 is positioned on the front left grate using groove depicted in Figure 5. Ensure the log is slid forward to bend in grate tine. The log also mates with the center grate tine using feature shown in Figure 5. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 58 Log #5 (SRV2270-706)  3RVLWLRQ /RJ  RQ WRS RI WKH FHQWHU JUDWH WLQH DQG LQWHUORFN ZLWK WKH ULJKW IURQW JUDWH WLQH PDWLQJ ZLWK WKH UHFHVV RQ /RJ  6HH )LJXUH  Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 59 ¿UHER[ PDWLQJ ZLWK UHFHVVHV LQ /RJ  DQG /RJ  /RJ  will rest on the top of Log #2 and mate with the middle grate tine. See Figure 16. Figure 16. Log Set Installed Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 60 The numbers are listed in parentheses above. NOTE: Interior of MARQ42IN is shown in log installation pictures. Instructions apply to both the MARQ42IN and MARQ42IN-B. Figure 1. Log Set Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 61 Log #2 (SRV2271-703): Position Log #2 on the front left grate using groove shown in Figure 5. Ensure the log is slid forward to bend in the grate tine. The log will also mate with the center grate tine using feature shown in Figure 5. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 62 Log #4 (SRV2271-704): See bottom of Log #4 in Figure 10. The two grooves will mate with the grate tines as shown in Figure 11. The log will contact the base refractory, side refractory panel, and the tip of Log #1, creating 5 total contact points. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 63 WKH ¿UHER[ PDWLQJ ZLWK UHFHVVHV LQ /RJ  DQG /RJ  /RJ #7 will rest on top of Log #2 and mate with middle grate. See Figure 17. Figure 17. Log Set Installed. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 64: Intellifire Touch Control System Setup

     :DLW WR YHULI\ /(' LQGLFDWRU RQ WKH (&0 VWRSV ÀDVK- ing. 5. Install batteries in the RC400 remote. 6. The RC400 remote will automatically pair to the appli- ance as pre-set at the factory. Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 65: Reference Materials

    (356 MM) (508 MM) 6 in. (152 mm) 14 IN. (356 MM) 12 IN. (305 MM) DVP-WS (Wall Shield Firestop) DVP-RDS ROOF DECK INSULATION SHIELD Figure 12.1 DVP vent components Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 66 Effective 79 mm 117 mm Length 5-3/8 in. 9-3/8 in. Trap2 137 mm 238 mm DVP-TRAP Horizontal Termination Cap DVP-TRAP2 DVP-TRAP1 DVP-TRAPK2 DVP-TRAPK1 Î Figure 12.2 DVP vent components Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 67 13-7/8 in. 9-1/2 in. Cap Shield (352 mm) (241 mm) 26 in. 660 mm 14 in. (356 mm) DVP-HSM-B Extended Heat Shield DRC-RADIUS Cap Shield Figure 12.3 DVP Vent Components Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 68 Note: The PVV-SLEEVE-12 and/or PVV-SLEEVE-48 is required to be installed with the PVV-SLP. It is ordered separately from the PVV-SLP. Contact your dealer to order. Figure 12.4 PVV-SLP Vent Components Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 69 9-3/16 IN. (233 mm) 13-5/8 IN. 16-11/16 IN. 16-11/16 IN. (346 mm) 424 mm (424 mm) 12-1/2 IN. SLP-LPC (318 mm) 6/3 /RZ 3UR¿OH &DS Figure 12.5 DVP vent components Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 70 Option A: IFT-RC400 or Option B: IFT-RC150, IFT-ACM. These accessories are purchased separately from the PVLP- SLP. Contact your dealer to order. PVLP-HS PVLP-BEK Heat Shield Brick Kit Figure 12.6 PVLP-SLP Vent Components Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...
  • Page 71: Accessories

    6WUHHW :HVW /DNHYLOOH 01  www.majesticproducts.com Please contact your Majestic dealer with any questions or concerns. For the location of your nearest Majestic dealer, please visit www.majesticproducts.com. 3ULQWHG LQ 86$  &RS\ULJKW  Majestic MARQ36IN-B, MARQ42IN-B Installation Manual • 2614-980 Rev. Q • 7/23...

This manual is also suitable for:

Marq36in-bMarq42in-b

Table of Contents