IrisVision LIVE 2.0 Quick Start Manual

LIVE 2.0 Quick Start Guide
Charge the IrisVision Smartphone
Connect the charging cord to the phone via
the USB-C port. Connect the other end of the
charging cable to the wall plug and an outlet.
You can charge during use of the device.
Power On the Smartphone Device
Press the power button on the side of the device
(the small button next to the yellow dot).
Connect to Wi-Fi
On the smartphone's home screen, swipe
down from the top of the screen and tap the
"Internet" option to access WiFi settings. Select
your preferred network from the list, enter the
password, and then tap the circle icon at the very
bottom to return to the home screen.
Calibrating and Focusing the Device
Place the phone in the headset, centering the
display with the power button facing up. Make sure
the camera is lined up with the camera cutout of
the headset cover. Ensure the spring bar is between
the phone and the headset cover, then shut the
cover until it clicks. Each lens has an individual
focus wheel; once the device is powered on and
seated, put on the headset and adjust the focus