Det-Tronics FlexVu UD30 Safety Manual

SAFETY MANUAL
FlexVu ® Universal Display
Model UD30
SAFETY CERTIFIED MODEL UD30 UNIVERSAL
DISPLAY
This manual addresses the specific requirements and
recommendations applicable to the proper installation,
operation, and maintenance of all Safety-Certified
(SIL-Certified) FlexVu ® Model UD30 Universal Display
(UD30) product versions. For complete information
regarding system overview, performance, installation,
operation, maintenance and specifications of the UD30
refer to instruction manual 95-8764.
QUALITY POLICY STATEMENT
All quality assurance control measures necessary for
safety management as specified in IEC 61508 Part 1
have been implemented. The quality management
system of Det-Tronics is based on the requirements
of EN ISO 9001 and ANSI/ASQC Q9001 through the
application of the United Technologies Company
Achieving Competitive Excellence (ACE) program. In
addition, the Quality Management System complies
with the European ATEX Directive requirements per EN
13980, the International Electrotechnical Commission
requirements per OD005/V2, and the supervised
testing requirements per ISO 17025.
SAFETY MESSAGES
Procedures and instructions in this section may
require special precautions to ensure the safety of
personnel performing the operations. Information that
raises potential safety issues is indicated by the word
"Warning". Always read and understand these safety
messages.
1.2
The UD30 is intended for use in hazardous
environments that may include explosive levels of
flammable gases and vapors. This product must
be properly installed, operated and maintained.
Improper installation or use could result in an
explosion or fire resulting in death or serious
injury.
• Do not remove the cover in explosive
environments when device power is on and
circuits are live.
• Device must be properly installed, and cover
must be fully engaged to meet hazardous area
explosion-proof/non-incendive requirements.
©
2024 Carrier. All rights reserved.
Last Manual Change: May 2024
WARNING
95-8777