Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for imex ELX3
Summary of Contents for imex ELX3
- Page 2 SAFETY Safety Ɯ Read the safety Instructions and manual thoroughly before using this product. All users must fully understand and adhere to these instructions Ɯ While the product is in operation, be careful not to expose your eyes to the emitting laser beam (red light source). Exposure to a laser beam for an extended time may be hazardous to your eyes Ɯ...
-
Page 4: Operation
OPERATION Keep the lock switch at ‘ ‘ position during moving the laser level or storage it. When the lock switch slides to the ‘ ‘ position, the machine unlocks and lights up all laser lines (1 horizontal laser line and 2 vertical laser lines): 1. - Page 5 Self-levelling Mode When the lock switch is set to ‘ ‘ , press the power button for a long time, all the laser lines are on, flashing every 5 seconds, and the indicator light is red. In this case, you can tilt the level at will. Press the power button for a long time and turn off the laser level meter.
-
Page 6: Specifications
SPECIFICATIONS & WARRANTY SPECIFICATIONS Accuracy ±3mm @10m Laser class Class 2 Thread ¼” Brightness 4 adjustable levels Range Power source 3.7V 4000 mAh 3.7V Li-ion battery Run time 6 hrs IP Rating IP54 Operating temperature -10° to +50°C Storage temperature -25°... -
Page 7: Maintenance
MAINTENANCE Ɯ The laser tool is sealed and calibrated at the plant to the accuracy specified. Ɯ It’s recommended to carry out a accuracy check before its first use and periodic checks during future use especially for precise layouts. Ɯ Do not short any battery terminals or charge alkaline batteries or dispose of batteries in fire. - Page 8 WWW.IMEXLASERS.COM iMEX Lasers - part of the Aptella Pty Ltd Group © 2024...
Need help?
Do you have a question about the ELX3 and is the answer not in the manual?
Questions and answers