CLEANING AND MAINTENANCE ........•H O W TO REPLACE THE INNER LID G ASKET ...16 HOW TO PERFORM CITRIC ACID CLEANING ....REPLACEMENT PA R TS ............Q&AON PRODUCT U S E ............1 TROUBLESHOOTING G U ID E ..........ZOJIRUSHI CORPORATION...
IMPORTANT SAFEGUARDS BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED WHEN USING ELECTRICAL APPLIANCES, INCLUDING THE FOLLOWING: 1. Read all instructions thoroughly. 2. Avoid touching hot surfaces and do not close or clog the steam vent opening under any circumstances. The handles and knobs are provided for your safety and protection.
Page 3
■ Attempting to do so may cause fire, electric shock or Do not remove the Upper Lid while boiling. injury. Make any repair inquiries to Zojirushi Customer Service. Do not damage the Power Cord. Do not immerse the product in water or splash it •...
Page 4
If any of the above occurs, unplug the product immediately and return to do not play with the product. Zojirushi Customer Service for check-ups and/or repairs. C A U T IO N S Always use caution when opening the Upper Lid Do not use other Power Cords than the one provided.
SPECIFICATIONS C D -W H C 40 r Model No. 135 oz. (4.0 liters) Capacity AC 120 V 60 Hz Rating Electric Consumption 700 W 208°F (98°C) Approx. 48 W Average Power 195°F (90°C) Approx. 40 W Consumption during Keep 175°F (80°C) Approx.
PARTS NAMES AND FUNCTIONS Lid Lock The rattling or metallic noise you may hear when opening or closing the Upper Lid or during Steam Vent boiling is normal, (see pg.19) •E xercise care during the boiling process as steam emitting from the Steam Vent is very hot.
Page 7
— — - — . _ _ f _ . «Press buttons down firmly. N E L I f l i A l * T h e Sound Signals and raised dot ( • ) in the center of the DISPENSE button is provided for those with visual impairment.
BOIL MODE Open the Upper Lid and fill the Inner Container with water using a pitcher or other container. To monitor the amount of water you are filling, look at the thickness of the stripes on • D o not fill the Inner the Water Level Gauge.
Page 9
■ T em pera :ure C o n v e rs o n G u id e The first time Fahrenheit (°F) Celsius (°C ) you use the product you may notice the smell of plastic. This is normal and will gradually fade using the product after a long period of storage: Fill the Inner Container with water to the Maximum Water Level Line (...
DISPENSE HOT WATER button to dispense hot water. Press the The UNLOCK light turns on and hot water can be dispensed. Do not swivel the product while dispensing water. •Initially upon boiling or if it has been a while after dispensing, the water may not be very hot.
HOW TO SET THE KEEP WARM MODE Press the button to Each press of the button changes the position (tempset) 4 " of t h e " on the Display. change the settings. •O n c e the tem perature is set, it is stored in memory even when the product is unplugged.
Page 13
•You can change the tem perature setting during Keep W arm mode. It may start reboiling depending on the w a te r' ^ temperature and the selected setting. •You cannot select the 208°F Keep W arm mode while the Quick Tem p mode is selected. S&You will hear 2 short beeps when 195°F Keep Warm mode is selected.
QUICK TEMP MODE This function heats the water to the selected Keep Warm temperature without reaching a boil. The water will reach the selected Keep Warm temperature quicker than the regular Boil mode. Other benefits include reduced steam and reduced energy use. Use this mode when dechlorination is not necessary, such as when using bottled or purified water. While the water is heating, After reaching the 160°F Keep Warm mode:...
CAFE DRIP DISPENSING MODE This mode decreases the amount of water dispensed to 60% of the normal setting, making it suitable for brewing café drip coffee. vLong beef)) ►Pressing the UNLOCK button again during Press the button Turns on (unlock) Café...
Body when tilted. Steam may also leak from the gap, causing burns and product failures, which may result in scalds. If hot water spews from the gap or there is steam even after replacing the Inner Lid Gasket, other parts may be in need of repair. Please contact Zojirushi Customer Service.
In order to prevent gas bubbles and bubbllng-over, the Citric Acid Cleaner for cleaning. 1*11 ♦ Electric Water Boilers (CD-K03E-JU) is recommended for cleaning. To purchase this cleaner, please visit an authorized Zojirushi dealer or www.zojirushi.com. Preparation: Hf the Filter is dirty, remove it from the Inner Container,...
Q&A ON PRODUCT USE Do not fill the product with any liquid other than water. It m ay cause Is it okay to use the product for ^p g -3 heating liquids other than water? m alfunction, o r m ay overflow and cause scalding. Does the w ater need to be To prevent scale from building up, please change the w ater at least once a y pg-10...
Page 19
Body and the Display may show window. moisture. This may cause short circuit or electric shock. Unplug the Power Cord and contact Zojirushi Customer Service. The Inner Container is Turns on...
Need help?
Do you have a question about the MICOM CD-WHC40 and is the answer not in the manual?
Questions and answers