LEGRAND 5 742 04 Manual

Connected switch for rolling shutters
5 742 04/13/22/31
This product is a connected accessory which requires you to buy and install the Arteor
with Netatmo connected starter pack first.
Pack contents
Connected switch
for rolling shutters
Characteristics
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician.
Incorrect installation and/or incorrect use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific
mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the
instructions. All Legrand products must be opened and repaired exclusively by personnel trained and
approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights
to replacement and guarantees. Use only Legrand brand accessories.
+ 45°C
+ 5°C
100-240 VAC 1 x 2.5 mm2
50/60 Hz 2 x 1.5 mm2
240 VAC max.
100 VAC max.
Rolling shutter
motor
1 x 500 VA
1 x 270 VA