Cowon iAUDIO F2 4GB User Manual page 31

Troubleshooting
60
Q
Characters on the display are corrupted.
&
Reset the language using Settings-Display-Language menu and set display format to File name using
A
Settings-Display-Title menu.
If the problem continues, reset the player to its Factory Default setting. Some special fonts may not
display perfectly.
Q
Computer cannot recognize the player when connected.
&
When connecting to the PC with a USB cable, please turn the player on before connecting USB cable. If
A
it is still not recognized by the PC, press RESET button next to the USB jack on the bottom of the player.
Connection to an external USB Hub may not be stable due to its low power. IAUDIO F2 should be con-
nected directly to a PC's USB port.
IAUDIO F2 may require additional driver installation for Windows 98 users. See section 1.7
Q
Player is not recognized by JetShell and "No iAUDIO found" message appears.
&
Check to see if the player is recognized in Windows Explorer when it is properly connected to PC.
A
IAUDIO F2 must be recognized in the Windows for it to work with JetShell.
Additional driver installation is required for Windows 98 and 98 SE users. See section 1.7.
Within JetShell, set Settings-Device to match your iAUDIO model.
Q
Memory capacity of the player is different or smaller than specified.
&
The memory capacity indicated by Windows Explorer may be different from that indicated by the
A
memory manufacturer. Typically for a 1GB memory will display 954MB as its full capacity.
IAUDIO F2 uses some area in the drive for system operation. Therefore, the actual available capacity is
somewhat reduced after excluding system area.
Q
iAUDIO does not play properly when memory is full.
&
For iAUDIO F2 to function properly, it requires at least 5 MB of space for saving settings and other
A
system files.
iAUDIO F2
61
iAUDIO F2