Cowon iAUDIO F2 4GB User Manual page 16

Using Advanced Features
30
1. After the player is turned on, select the FM Radio mode.
2. Tune to the favorite radio station and press
Preset mode.
3. Press button to switch to Preset Search mode.
4. Press buttons to select the desired channel, and press
5. Select "Save current Ch" to add the current frequency to the preset channel.
6. Listen to the preset channels by selecting "Listen Ch" or delete preset channels by selecting "Delete Ch"
7. Pressing button in the PRESET scanning mode returns to FM tuning mode. The "PRESET" will disappear
- If there are no frequencies in Preset mode, the tuning frequency will not change.
- Up to 24 frequencies can be stored in Preset Channels.
■ Recording FM Radio
1. After the player is turned on, select the FM Radio mode.
2. Set the tuning frequency to the desired radio station.
3. Press button to start recording.
4. Press button again to stop recording.
■ Scheduled Recording of FM Radio
Timer
Time setup
Wakeup mode
Wakeup time
Sleep Off
Auto off 1M
iAUDIO F2
button. A "PRESET" will appear on screen and the player switches to
button to open a pop-up window.
Timer Wakeup mode
Time setup Off
Wakeup mode Music Alarm
Wakeup time FM Alarm
Sleep Off FM Record
Auto off 1M
1. Set the correct time on iAUDIO F2. Refer to section 4.6.
2. In the Settings / Timer menu, select the Wakeup Mode and set it to FM Recording
3. In the Settings / Timer menu, select the Wakeup Time and set it to desired time for recording.
4. The player will turn on automatically at the specified time and starts recording the FM Radio signal
- Recorded files are stored in "RECORD" folder
- During recording, battery consumption is higher than other playback operation.
- Sound quality and capacity of recordings may vary according to reception quality and recording settings. See the section
4.8 for further information
3.3. Recording Using Built-In Microphone
■ Recording with Built-in Microphone
1. Make sure that the recording mode is set to Voice in Settings – Recording- Recording Mode menu.
2. Switch to the Record mode by pressing button and then choose Record icon.
3. Press button to start recording with the built-in microphone.
4. During recording, press the button to pause or resume the recording
5. Press button to end recording.
6. To play recorded files, press button and listen on the earphones
Using Advanced Features
iAUDIO F2
31