Take Out What You Need - Cisco 2610 Quick Start Manual

1

Take Out What You Need

This guide explains how to cable and set up your
Cisco 2610 router with the following
configuration:
• 8- or 16-port internal analog modem in the
network module slot.
• 2 empty WAN interface card slots with a
blank panel in each slot.
Begin by taking out the following items from the
box.
Quick Start Guide and
Fast Step CD-ROM
2
1 Quick Start Guide (this guide) with
1 Cisco Fast Step CD-ROM (attached)
Router
1 Cisco 2610
Note: If your router has a different hardware
configuration, refer to the Cisco 2600 Series
Hardware Installation Guide for information on
how to install and set up your router.
RPS ACTIVITY
Cisco 2600
SERIES