Polar Alignment In The Southern Hemisphere - Celestron AstroMaster 114EQ Instruction Manual

Astromaster series telescopes
Hide thumbs Also See for AstroMaster 114EQ:
Table of Contents

Advertisement

P
o
l
a
r
A
l
i
g
n
m
e
n
P
o
l
a
r
A
l
i
g
n
m
e
n
Polar alignment to the South Celestial Pole (SCP) is a little more challenging due to the fact that there is no very bright
star close to it like Polaris is in the NCP. There are various ways to polar align your telescope and for casual
observing the methods below are adequate and will get you reasonably close to the SCP.
Polar Alignment with the Latitude Scale
Figure 4-7
If you are observing from Sydney, which is at latitude -34°, then the celestial pole is 34° above the southern horizon.
All a latitude scale does then is to point the polar axis of the telescope at the right elevation above the southern
horizon. To align your telescope:
1.
Make sure the polar axis of the mount is pointing due south. Use a landmark that you know faces south.
2.
Level the tripod. Leveling the tripod is only necessary if using this method of polar alignment.
3.
Adjust the mount in altitude until the latitude indicator points to your latitude. Moving the mount affects the angle
the polar axis is pointing. For specific information on adjusting the equatorial mount, please see the section
"Adjusting the Mount" in your telescope manual.
4.
If the above is done correctly, you should be able to observe near the pole through the finderscope and a low
power eyepiece.
This method can be done in daylight, thus eliminating the need to fumble around in the dark. Although this method
does NOT put you directly on the pole, it will limit the number of corrections you will make when tracking an object.
Figure 4-6 Aligning the equatorial mount to the polar axis of the Earth
t
i
n
t
h
e
S
o
u
t
h
e
r
t
i
n
t
h
e
S
o
u
t
h
e
r
The easiest way to polar align a telescope is with a latitude scale. Unlike other
methods that require you to find the celestial pole by identifying certain stars near it,
this method works off of a known constant to determine how high the polar axis should
be pointed.
The constant, mentioned above, is a relationship between your latitude and the angular
distance the celestial pole is above the southern horizon. The angular distance from the
southern horizon to the south celestial pole is always equal to your latitude. To
illustrate this, imagine that you are standing on the south pole, latitude -90°. The south
celestial pole, which has a declination of -90°, would be directly overhead (i.e., 90°
above the horizon). Now, let's say that you move one degree north — your latitude is
now -89° and the celestial pole is no longer directly overhead. It has moved one
degree closer toward the southern horizon. This means the pole is now 89° above the
southern horizon. If you move one degree further north, the same thing happens again.
You would have to travel 70 miles north or south to change your latitude by one
degree. As you can see from this example, the distance from the southern horizon to
the celestial pole is always equal to your latitude.
n
H
e
m
i
s
p
h
e
r
e
n
H
e
m
i
s
p
h
e
r
e
19

Advertisement

Table of Contents
loading

Table of Contents