URBAN OUTFITTERS Chuck Low Dresser Assembly Instructions

Chuck Low Dresser
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
Phillips head screwdriver, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
Anti-Tip Hardware must be in place to ensure safety from tipping.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
(A)
Dresser
x1
(E)
Bracket
x2
06.25.2024
(B)
Leg
x4
(F)
Screw
[M3 x 19mm] x2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
URBAN OUTFITTERS
(C)
Drawer pull
x4
(G)
Screw
[M3 x 19mm] x2
(D)
Nylon strip
x1
Page 1 of 3