URBAN OUTFITTERS Casper Assembly Instructions

Casper Side Table
Assembly Instructions
NO ADDITIONAL TOOLS REQUIRED
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Ensure all parts are present prior to assembly.
Contact customer service immediately if parts are missing.
Assemble all parts on a clean smooth surface.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills with a clean white cloth, do not rub.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
1)) Shelves
(12 x 15 x 2") x 2
or
(30.5 x 38.1 x 5cm)
A) Bolt
(D 0.47 / 0.24 x 2.8") x 8
or
(D 12 / 6 x 70 mm)
05.02.2024 REV1
B) Spring Washer
(D 0.47 / 0.24 x 0.08") x 8
or
(D 12 / 6 x 2 mm)
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO,
Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
URBAN OUTFITTERS
(20 x 3 x 3") x 4
(50.8 x 7.5 x 7.5cm)
C) Flat Washer
(D 0.63 / 0.24 x 0.08") x 8
or
(D 16 / 6 x 2 mm)
2)) Legs
or
D) Allen Key
(D 0.16 x 2.32") x 1
or
(D 4 x 59 mm)
Page 1 of 2