Sealey SCRT01 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. INTRODUCTION
Multi height and angle adjustments to work in comfort on high level engines on jeeps, pickups, trucks, SUV's, agricultural vehicles, and more.
Work at the right height and angle in comfort, on the 60mm deep foam, heavy vinyl covered body pad. Heavy-duty steel framework, powder
coat painted for an anti-scratch/rust finish. Easy-rolling Ø75mm composite swivel castors (two lockable). Folding design for easy transport and
storing.
2. SAFETY
WARNING!: Read and understand all instructions before assembling or using the creeper. Keep this manual for safety warnings,
‰
precautions, operating or maintenance instructions.
DO NOT spend long periods on a creeper without regular breaks (tiredness is a risk).
8
DO NOT use the creeper if contaminated, e.g. with wet paint, mud, oil or snow.
8
DO NOT use the creeper outside in adverse weather conditions, such as strong wind or wet conditions.
8
DO NOT modify the creeper design. Only qualified service personnel should maintain or repair the tool.
8
DO NOT move a creeper while mounted on it.
8
DO NOT stand or sit on the chest pad deck.
8
DO NOT use the creeper to work over a running engine.
8
DO NOT use the tool if any parts are damaged, broken or misplaced. Only qualified service personnel to maintain or repair the tool.
8
DO NOT exceed the maximum load capacity of the creeper (150kg).
8
Always ensure height adjustment bar is securely fixed in one of the five position slots prior to using.(refer to section 5.2 to adjust
9
working height).
Always lock castors (fig.2) before use.
9
Lean your chest onto the deck cushion gently. Avoid causing a shock load by jumping or falling onto it.
9
Prevent damage to the creeper when transporting e.g. by fastening it. Ensure fasteners are suitably placed to prevent damage.
9
Ensure the creeper is suitable for the task to be undertaken.
9
For professional use, a risk assessment shall be carried out respecting the legislation in the country of use.
9
When positioning the creeper take into account the risk of collision with the creeper from pedestrians, vehicles or doors. Secure
9
nearby doors (not fire exits) and windows in the work area where possible.
Always lock castors before mounting.
9
Keep work area clear, well lit and free of distractions and keep bystanders away from work area.
9
Wear suitable PPE for task being carried out i.e safety goggles, gloves, work wear.
9
NOTE: The maximum capacity listed (150kg) includes the user, tools, equipment and personal items.
2.1. SAFETY SYMBOLS
WARNING: Falling from creeper.
This warning sign shall appear on each
marking on the creeper at the first place.
Refer to instruction manual/booklet
Inspect the creeper after delivery. Before
every use visually inspect the creeper to
check it is not damaged and is safe to use.
DO NOT use a damaged creeper.
Maximum total load
DO NOT use creeper on uneven or unstable
surfaces.
© Jack Sealey Limited
TOPSIDE CREEPER
SCRT01
MODEL NO:
Original Language Version
Maximum number of users is 1.
DO NOT ascend or descend unless you are
facing the creeper.
Keep a secure grip on the creeper when
ascending/descending. Maintain handhold
whilst working from a creeper or take
additional safety precautions if you cannot.
Avoid work that imposes a sideways load on
Creeper, such as side-on drilling through
solid materials.
DO NOT carry equipment which is heavy or
difficult to handle when using a creeper.
SCRT01 Issue 3 26/06/24